3 way post #6 - the cabinet - diyAudio
Go Back   Home > Forums > Blogs > Rob's active 3way with transconductance chipamps build blog
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
My build blog for my active 3 ways.
Rate this Entry

3 way post #6 - the cabinet

Posted 14th November 2009 at 05:35 PM by relder

A Wilson type setup - the mid/tweet box is separate from the woofer box. The upper box is open front and back - replaceable baffles on both sides in case I care to change something, either drivers or sealed vs. open back.

The bottom cab is MDF. I had some of that concrete board left over from an outdoor kitchen project and figred I'd laminate it to the front baffle under the woofer. I don't think it was worth the effort. A knuckle rap test on the sides vs. front showed no huge difference.

The top cab is MDF laminated with baltic birch.
Attached Thumbnails
Click image for larger version

Name:	open_cab.jpg
Views:	452
Size:	91.9 KB
ID:	36   Click image for larger version

Name:	full-cab.jpg
Views:	546
Size:	89.1 KB
ID:	37  
Posted in 3 Way
Views 551 Comments 0
Total Comments 0

Comments

 
Hide this!Advertise here!

New To Site? Need Help?

All times are GMT. The time now is 04:16 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
Copyright 1999-2016 diyAudio

Content Relevant URLs by vBSEO 3.3.2
Wiki