When I was planning the wiring scheme for the Baby Desktop O2, originally, I thought I would use 3 and 4 pin board mounted posts with equivalent pin connectors so all the flying wires could be disconnected from the board. I realized that would be too much work(and probably even more prone to disconnection so I only made one of the connections removable (the 3 pin P1 jack for the RCA inputs, beside the input J2 connector).
(note to add part #s for the pins and connectors I used)
Make sure you grind off the anodized coating around the holes on the inside of the panel before you mount the RCAs to get a good ground connection.
I used individual pairs of wire from solid core Cat5 cable for all the connections, and in my wiring description, I'll be using the wire colours from the cable I used. (it helped since I built 16 of them.. )
For P1 (for RCA input) I used Brown/white for Right and Blue/white for Left. The square pad(close to the the...