diyAudio - Entries for April 2013
Go Back   Home > Forums > Blogs > mondogenerator

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Old

My Ikea Blanda Bowl Build Diary

Posted 6th April 2013 at 08:56 PM by mondogenerator

So upon seeing many nice Blanda bowl projects here on DIYAudio I thought it about time I had a try and see what all the fuss is about!

About a year or so past I went through a phase of buying the nicest small wide-band drivers I could. Whether I achieved this is subject to the readers' opinion

So I have a pair of Mark Audio Alpair 5, and a pair of Tangband W3-1285SG. Both of these drivers were available to me in the UK at a very similar price-point and they both fall roughly into the 3" wide-band category. (Shown in the following picture alongside some Tangband 2" drivers)

Click the image to open in full size.

I chose to buy the 20cm Blanda bowls in bamboo. Gross volume works out at ~2 litres. Factor in stuffing or denser absorbent and I guesstimate a 1 litre volume.

This is really too small for the Alpairs, but the 2 dB rise towards the cut-off wasn't...
mondogenerator's Avatar
diyAudio Member
Posted in Uncategorized
Views 606 Comments 0 mondogenerator is offline
Hide this!Advertise here!

New To Site? Need Help?

All times are GMT. The time now is 07:16 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2