diyAudio - Joys' World of Retronix
Go Back   Home > Forums > Blogs
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Pure valve to hybrid audio applications, with some digital techniques as well, something for every one, that's my goal!

ECL86 SE-Amp, the easy way...

Posted 23rd November 2009 at 07:09 PM by joys (Joys' World of Retronix)
Updated 23rd November 2009 at 07:13 PM by joys

I'll start today and let's see how long it'll take me to finish this article, about an easy to build and cheap amplifier, with ECL86 or with a few tweaks an ECL82 can be used. This is actually not my totally own design. It's taken from the 'Muller' Tube Manual, but I added a input stage with tone control 2 or 3-ways, depending on your flavour. And a loudness-control...
What you need accept the passive components are;
(double up all parts for a stereo-amp.)
One EF86 - high-mu signal-pentode, for the tone-ctrl and gain-stage.
One ECL82/86 driver and power pentode for our SE-AMP.
One output transformer, Z = 7k - 10k(if you want to build a stereo, make sure you use the same brand and model, the core and turn-ratio is critical, if you desire the same sound from each channel!)
One power-transformer(mains), 230 - 250V@100ma(or 160 ma for stereo) and 6V3@2-4A(4A for stereo).

I've based my design on this article, from a magazine, printed in...
diyAudio Member
Posted in Uncategorized
Views 3247 Comments 1 joys is offline
Hide this!Advertise here!

New To Site? Need Help?

All times are GMT. The time now is 04:36 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2