First test post to blog - general audio gear - diyAudio
Go Back   Home > Forums > Blogs > googlyone

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Rate this Entry

First test post to blog - general audio gear

Posted 11th December 2010 at 01:48 AM by googlyone

Couple of projects of mine - not sure if the photos will load OK.

First is a pair of 25Hz horn subs I used to have - used 18inch p.audio drivers, placed facing one another along a wall to form part of the horn and achieve adequate mouth area for the 25Hz cutoff.

Efficiency was well over 100dB/w/m.

Second photo is one of my digital crossovers I built, 4 way AD1940 based audio DSP with an AD1939 CODEC as A/D and D/A. Works a treat, and makes setting speakers up a snip, as can program in delays, HPF / LPF, parametric etc.

Also included my subwoofer couch - I built this as a challenge from a colleague of mine. The carcass of the couch forms an 800 litre enclosure, the ports exit at the back of the headrest three of them, and I used four fifteen inch drivers. It is tuned to 19Hz, and achieves a -3dB point below 20Hz.
Attached Thumbnails
Click image for larger version

Name:	DSC07940.jpg
Views:	569
Size:	441.4 KB
ID:	295   Click image for larger version

Name:	DSC04938.jpg
Views:	379
Size:	336.1 KB
ID:	296   Click image for larger version

Name:	Resize of DSC00397.JPG
Views:	335
Size:	65.7 KB
ID:	297   Click image for larger version

Name:	sub couch drivers in.JPG
Views:	1245
Size:	45.9 KB
ID:	298  
Posted in Uncategorized
Views 744 Comments 0 Email Blog Entry
Total Comments 0

Comments

 
Hide this!Advertise here!

New To Site? Need Help?

All times are GMT. The time now is 01:05 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2