diyAudio - Entries for February 3, 2013
Go Back   Home > Forums > Blogs > googlyone

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Old

Another Ikea Bowl Speaker

Posted 3rd February 2013 at 11:04 AM by googlyone

I stumbled on the people making speakers from the Ikea bowls. It kind of inspired me as the speakers were truly different and bizarre, but at the same time something completely different.

So I had to make some.

I fumbled around in the cupboard and came up with three choices of woofers that would do OK in a small enclosure - and after a few measurements and stuff settled on a pair of old Vifa M13SG-09-16 drivers. These were pretty well suited to an enclosure of a bit over 8 litres.

This drove me to the larger bowl, a 28cm one.

This is how they came out...

Click image for larger version

Name:	Speakers_Stands.jpg
Views:	1621
Size:	150.8 KB
ID:	872

To fit the driver I simply routed a rebate - and then cut the inside out.

Click image for larger version

Name:	Bowl_Router.jpg
Views:	928
Size:	103.2 KB
ID:	864

The material of the bowl was quite thin once I had finished routing things - so I cut out a circle of ply and glued it to the inside of the bowl. I had to go out for the evening at that point so I simply...
Attached Thumbnails
Click image for larger version

Name:	Bowl_Outside.jpg
Views:	601
Size:	122.0 KB
ID:	863   Click image for larger version

Name:	Hanging_Test.jpg
Views:	1695
Size:	98.9 KB
ID:	865   Click image for larger version

Name:	Ikea_bowl_rebated.jpg
Views:	371
Size:	137.1 KB
ID:	866   Click image for larger version

Name:	Pulse_Response.jpg
Views:	308
Size:	107.3 KB
ID:	867   Click image for larger version

Name:	Reinforcing.jpg
Views:	287
Size:	97.0 KB
ID:	868  

Click image for larger version

Name:	reinforcing_Inside.jpg
Views:	443
Size:	115.3 KB
ID:	869   Click image for larger version

Name:	Speaker_Stand.jpg
Views:	1165
Size:	107.5 KB
ID:	870   Click image for larger version

Name:	Speaker_Stand_Close.jpg
Views:	616
Size:	149.2 KB
ID:	871  
diyAudio Member
Posted in Uncategorized
Views 2297 Comments 1 googlyone is offline
Hide this!Advertise here!

New To Site? Need Help?

All times are GMT. The time now is 04:56 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2