Multi Channel Amplifier with DSP Crossover - Retro styling - diyAudio
Go Back   Home > Forums > Blogs > googlyone

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Rate this Entry

Multi Channel Amplifier with DSP Crossover - Retro styling

Posted 13th July 2014 at 02:26 AM by googlyone

What sort of amplifier do you build to go with a funky retro subwoofer and "Ikea Salad Bowl" speakers?

How do you reconcile this with the fact that you have a "metric shitload" of DSP stuff laying around?

I have run into this problem, and concluded that I need to mash these into something that is not new and higher tech than old style.

This has resulted in me trying to train smash "new and old" into what I am hoping will be a retro styled, but thoroughly high tech-on-the-inside amplifier. (Stopping short of going class - D which I hold aesthetic objections against).

So lets get started with the basics. The amplifier will not be square - it will be a parallelogram...

Click image for larger version

Name:	Panel Outline.jpg
Views:	54
Size:	90.8 KB
ID:	1332

And to follow up with my (albeit young) recollections of the 1970's, it CANNOT be black.

This amplifier needs to be the most acid driven shade of orange that I can find.

Oh, and for labelling, I will take a swing at painting some really retro (sloped to match the amplifier shape) logo on the front.

The shape does however do horrible things to the internal layout. If a fit of sensibility I did some drawings, which is something I normally od a pretty superficial job of for mechanicals... but this one is going to be odd and tight.
Click image for larger version

Name:	DSP_Mounting.jpg
Views:	40
Size:	110.1 KB
ID:	1331
Click image for larger version

Name:	Amplifier_Mounting.jpg
Views:	32
Size:	100.2 KB
ID:	1330

The above show the DSP subsystem being squashed against the sloping left hand side panel, and on the right, the side wall is the heatsinks, which will need to be cut at 22 degrees, resulting in the amplifier boards tilting toward the lid of the amplifier.

I have made fair progress:
Click image for larger version

Name:	DSP_Image_EndShot.jpg
Views:	57
Size:	184.1 KB
ID:	1333
Click image for larger version

Name:	IMG_1774.jpg
Views:	53
Size:	639.3 KB
ID:	1337
Click image for larger version

Name:	DSP_Regs.jpg
Views:	61
Size:	168.6 KB
ID:	1338

The DSP uses the A/D's and DSP core that I did a year or so ago. I built a bunch of these on the theory that the main time required to build boards is getting all the bits our, especially when you are reflow soldering most of it.

This amplifier will be 2 channel in, four out. This will allow me to invert one sub channel and run a biamped mono sub.

The power supply is probably over the top...
Click image for larger version

Name:	Power_Supply and Speaker_Prot.jpg
Views:	63
Size:	144.4 KB
ID:	1336
Click image for larger version

Name:	DSP and Power Supply1.jpg
Views:	62
Size:	182.4 KB
ID:	1334

The main reason the power supply uses two transformers is that I had some 25Volt, 300VA transformers. Using two of these I can get decent supply rails - delivering say 50 Watts into 8 Ohms.

This is fine for the mid-high output, but I did want the capacity for a few more watts on the sub. Not least as the old Richard Allan driver is 16 Ohms!

Nevertheless, the power supply has probably twice any reasonable capacity.

So I loaded up on the supply caps. Again, mainly because I had them, and also because it makes me happy.

Click image for larger version

Name:	DSP_Controls.jpg
Views:	60
Size:	124.3 KB
ID:	1335

All the electronics is set to work, the power amp modules built and tested. I just need to go by the workshop at work and do some serious cutting of heatsinks.

I am resisting the urge to put the DSP controls on the front. I want that dominated by:
-A- A crazy 60's / 70's colour
-B- A funky logo

So the only thing on the front will be a volume control. I might relent and put a window in th top allowing me to see the DSP display, allowing me to fiddle - but I am still holding out against the temptation!
Posted in Uncategorized
Views 283 Comments 1 Email Blog Entry
Total Comments 1

Comments

  1. Old Comment
    wintermute's Avatar
    looking forward to the finished pics googlyone

    Tony.
    permalink
    Posted 13th July 2014 at 09:50 PM by wintermute wintermute is offline
 
Hide this!Advertise here!

New To Site? Need Help?

All times are GMT. The time now is 01:37 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2