Pedja Rogicīs Discrete Diamond Non-Feedback I/V Stage - Out of production - diyAudio
Go Back   Home > Forums > Blogs > dvb projekt
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Rate this Entry

Pedja Rogicīs Discrete Diamond Non-Feedback I/V Stage - Out of production

Posted 17th May 2011 at 05:15 PM by dvb projekt
Updated 14th June 2013 at 10:46 AM by dvb projekt

For all of you who want an alternative non-tube I/V stage,
Pedja Rogic was so kind and permit me to make a pcb with his circuit.

To get a smaller pcb, i made two connectors for the needed big 10ĩF caps.


Click the image to open in full size.


The PCB will have the following data:

Material: FR4 - 2mm
Layers: 2
Board size: 110x95 mm
Surface finish: Immersion Gold
Copper weight: 70ĩm
Soldermask: Both sides - green
Silkscreen: Legend on top

Out of production

Attached Files
File Type: pdf Pedja Rogic DDNF IV Stage.pdf (71.0 KB, 4408 views)
File Type: zip Pedja Rogicīs DDNF IV Stage BOM.zip (4.9 KB, 539 views)
Views 4269 Comments 5
Total Comments 5

Comments

  1. Old Comment
    Hallo Oliver I like to have 1 Pedra Rogic DDNF i/v and
    (if it become's real a I/V PSU).

    Groet Antonioo
    permalink
    Posted 18th May 2011 at 10:26 AM by antonioo antonioo is offline
  2. Old Comment
    Add me to the list - thanks!

    Ryelands
    permalink
    Posted 18th May 2011 at 05:54 PM by Ryelands Ryelands is offline
  3. Old Comment
    Oliver , after reading again, i don't now if i need 1 or 2
    i/v for double dac???

    Antonioo
    permalink
    Posted 19th May 2011 at 10:05 AM by antonioo antonioo is offline
  4. Old Comment
    dvb projekt's Avatar
    Quote:
    Originally Posted by antonioo
    Oliver , after reading again, i don't now if i need 1 or 2
    i/v for double dac???

    Antonioo
    Antonioo,

    if you want to use two TDA1541A DAC modules parallel, you need only one of the DDNF I/V module.

    Just change the R I/Vīs from 1K5 to 750R (see BOM).

    permalink
    Posted 19th May 2011 at 10:08 AM by dvb projekt dvb projekt is offline
  5. Old Comment
    No tubes!!! Who would want that.

    Greg
    permalink
    Posted 22nd May 2011 at 12:48 PM by headrott headrott is offline
 
Hide this!Advertise here!

New To Site? Need Help?

All times are GMT. The time now is 01:02 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
Copyright Đ1999-2016 diyAudio

Content Relevant URLs by vBSEO 3.3.2
Wiki