The final parts for the Reference DAC Case - diyAudio
Go Back   Home > Forums > Blogs > dvb projekt
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Rate this Entry

The final parts for the Reference DAC Case

Posted 25th April 2011 at 10:26 AM by dvb projekt

Click the image to open in full size.

On the left side

USB-Isolator from Circuits@Home

Teralink X2 USB to I2S converter (with my modification)

TDA1541A Salas shunt reg. module

+5V Salas shunt reg. module
(downlink side of USB isolator incl. +5V line of Teralink X2/ Twisted Pear WM8804 / Ultra highspeed buffer module / I2S switch)

+3,3V Salas shunt reg. module (+3,3V line of Terlink X2)



In the middle

Twisted Pear WM8804 SPDIF to I2S converter

On top the Ultra High Speed Buffer module

I2S switch

2* TDA1541A DAC module with direct input shunt mod.



On the right side

2* SSHV-Shunt module (one for each channel)

Tube-I-zator V2.0
(the remaining parts of the onboard HV-PSU are not necessary,
because of the Tube-Rectifier in my separate PSU case)


Total Comments 0

Comments

 
Hide this!Advertise here!

New To Site? Need Help?

All times are GMT. The time now is 05:17 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
Copyright 1999-2016 diyAudio

Content Relevant URLs by vBSEO 3.3.2
Wiki