Tube-I-zator V2.0 Output Stage - Out of production - diyAudio
Go Back   Home > Forums > Blogs > dvb projekt
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Rate this Entry

Tube-I-zator V2.0 Output Stage - Out of production

Posted 7th April 2011 at 01:14 PM by dvb projekt
Updated 30th November 2016 at 09:33 AM by dvb projekt

The Tube-I-zator V2.0

Click the image to open in full size.

The evolution brings the following changes:

- Heater Switch without any relays
- Low ESR Heater PSU (e.g. Panasonic FM)
- Star Grounding
- Mounting holes for the HV-Salas Shunt Module
- Compacter design

The PCB has the following data:

Material: FR4 - 2mm
Layers: 2
Board size: 193x157 mm
Surface finish: Immersion Gold
Copper weight: 70m
Soldermask: Both sides - green
Silkscreen: Legend on top

Out of production
Attached Files
File Type: pdf Tube-I-zator V2.0.pdf (19.4 KB, 1912 views)
File Type: zip Tube-I-zator SSHV-Shunt BOM (6.8 KB, 1098 views)
Views 3938 Comments 0
Hide this!Advertise here!

New To Site? Need Help?

All times are GMT. The time now is 09:10 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2