diyAudio - Entries for September 2013
Go Back   Home > Forums > Blogs > dvb projekt

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

The new Tube-I-zator V3.1

Posted 16th September 2013 at 06:28 PM by dvb projekt
Updated 6th September 2015 at 04:06 PM by dvb projekt (Stock status update)

The new Tube-I-zator V3.1

Click the image to open in full size.

The evolution brings the following changes:

- Anode PSU with Salas SSHV Shunt Reg. onboard
- External B+ Input for usage with other Anode PSU
- Heater PSU with C-R-C filtering
- Heater PSU with Softstart circuit
- Heater PSU Power LED

- Design failures corrected

Thanks to John (-ecdesigns-) for the following suggestions!

- Grid stoppers to prevent unwanted oscillations
- Bias current injection for TDA1541A usage
- Pull-down resistors to keep the coupling cap output at GND-potential

Still on the Module:

- Heater switch for 6N2P or 12AX7 usage

An example for a balanced use (e.g. Bufalo II), you could see HERE.

The PCB has the following data:

Material: FR4 - 2mm
Attached Files
File Type: zip Tube-I-zator V3.1 - (7.6 KB, 384 views)
File Type: pdf Tube-I-zator V3.1.pdf (835.7 KB, 890 views)
dvb projekt's Avatar
diyAudio Member
Posted in Offer
Views 2357 Comments 0 dvb projekt is offline
Hide this!Advertise here!

New To Site? Need Help?

All times are GMT. The time now is 08:45 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.
Copyright 1999-2015 diyAudio

Content Relevant URLs by vBSEO 3.3.2