diyAudio - Entries for April 5, 2013
Go Back   Home > Forums > Blogs > dvb projekt
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Old

Tube-I-zator V3.0 - Out of production

Posted 5th April 2013 at 03:28 PM by dvb projekt
Updated 16th September 2013 at 05:16 PM by dvb projekt

Tube-I-zator V3.0

Click the image to open in full size.

The evolution brings the following changes:

- Anode PSU with Salas SSHV Shunt Reg. onboard
- External B+ Input for usage with other Anode PSU
- Heater PSU with C-R-C filtering
- Heater PSU with Softstart circuit
- Heater PSU Power LED

Thanks to John (-ecdesigns-) for the following suggestions!

- Grid stoppers to prevent unwanted oscillations
- Bias current injection for TDA1541A usage
- Pull-down resistors to keep the coupling cap output at GND-potential

Still on the Module:

- Heater switch for 6N2P or 12AX7 usage



An example for a balanced use (e.g. Bufalo II), you could see HERE.



The PCB has the following data:

Material: FR4 - 2mm
Layers: 2
Board size: 193x157 mm
Surface
...
Attached Files
File Type: pdf Tube-I-zator V3.0.pdf (30.2 KB, 839 views)
File Type: zip Tube-I-zator V3.0 - BOM.xls.zip (7.6 KB, 391 views)
dvb projekt's Avatar
diyAudio Member
Views 1735 Comments 0 dvb projekt is offline
Hide this!Advertise here!

New To Site? Need Help?

All times are GMT. The time now is 03:27 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
Copyright 1999-2016 diyAudio

Content Relevant URLs by vBSEO 3.3.2
Wiki