Interesting Horn info
Posted 11th July 2013 at 10:55 PM by DougL
In this post the User clams that the Compression driver Atlas PD5V is a derivative of the WE555, which was good down to 100 Hz
https://www.diyaudio.com/forums/multi...ml#post3558010
There was also mention of an AES paper on how to create a phase plug for a cone driver.
Based on Romy's ideas on a mid-bass horn, This might cover down to 200 / 300 hz to transition to a Tapped horn.
https://www.diyaudio.com/forums/multi...ml#post3558010
There was also mention of an AES paper on how to create a phase plug for a cone driver.
Based on Romy's ideas on a mid-bass horn, This might cover down to 200 / 300 hz to transition to a Tapped horn.
Total Comments 2
Comments
-
Posted 12th July 2013 at 05:02 AM by DougL -
If you can get Renkus Heinz or Emilar 2" exit drivers you get
equal performance to the Radians as these are all
designed by Jonas Renkus and differ only in areas that
do not alter the sonics to the point where anyone could
tell them apart.
I discarded 2" exit drivers for domestic use altogether.
A good 1" driver like Radian, Emilar, Renkus Heinz ect.
on a Seos 12" horn is pure bliss. Goes from 1khz to 18khz and
the top octave even sounds better than a really good bullet tweeter
because there is no integration problem.
Quote from:
https://www.diyaudio.com/forums/multi...ml#post3679209Posted 25th October 2013 at 03:31 PM by DougL
Updated 25th October 2013 at 04:57 PM by DougL