Go Back   Home > Forums > Blogs > DougL

Rate this Entry

Interesting Horn info

Posted 11th July 2013 at 10:55 PM by DougL

In this post the User clams that the Compression driver Atlas PD5V is a derivative of the WE555, which was good down to 100 Hz


https://www.diyaudio.com/forums/multi...ml#post3558010

There was also mention of an AES paper on how to create a phase plug for a cone driver.

Based on Romy's ideas on a mid-bass horn, This might cover down to 200 / 300 hz to transition to a Tapped horn.
Posted in Uncategorized
Views 1088 Comments 2
« My Horn Project     Main     Horn Resources »
Total Comments 2

Comments

  1. Old Comment
    Here is a DIY phase Plug information.

    Phase Plugs
    permalink
    Posted 12th July 2013 at 05:02 AM by DougL DougL is offline
  2. Old Comment
    If you can get Renkus Heinz or Emilar 2" exit drivers you get
    equal performance to the Radians as these are all
    designed by Jonas Renkus and differ only in areas that
    do not alter the sonics to the point where anyone could
    tell them apart.
    I discarded 2" exit drivers for domestic use altogether.
    A good 1" driver like Radian, Emilar, Renkus Heinz ect.
    on a Seos 12" horn is pure bliss. Goes from 1khz to 18khz and
    the top octave even sounds better than a really good bullet tweeter
    because there is no integration problem.

    Quote from:
    https://www.diyaudio.com/forums/multi...ml#post3679209
    permalink
    Posted 25th October 2013 at 03:31 PM by DougL DougL is offline
    Updated 25th October 2013 at 04:57 PM by DougL
 

New To Site? Need Help?
Copyright ©1999-2017 diyAudio