Progression - A Low Power Desktop Amp - diyAudio
Go Back   Home > Forums > Blogs > BuildMeSomething
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Rate this Entry

Progression - A Low Power Desktop Amp

Posted 9th April 2013 at 09:06 PM by BuildMeSomething
Updated 13th April 2013 at 09:21 AM by BuildMeSomething

Power supply boards are on their way, as is a full Digikey order for this project. However, no LME49722, which are currently out of stock. Due to that and wanting to keep to a 1 x psu & 1 x amp layout, the amp board underwent a quick re-design. It's now duel mono layout, utilising two LME49990.

Ordered LT1033/LT1085 for the PSU, these should give 3A each [typical]. Plus, six 4,700uf caps to help out. The plan is to run the rails at +/-15Vdc, with a 120VA 2x15V toroidal transformer.

Will place an order for the prototype amp boards on Saturday, just before I go on holiday.

Update (13-04-11): The PSU PCB's still haven't arrived, Plus UPS failed to deliver my Digikey order, this is now in limbo as they're saying "A correct street name is needed for delivery" ... I've talked to both Digi-key & UPS (U.S.) and they have the correct full address, UPS (UK) I can't get hold of... my translation is "Delivery driver can't read a map!"

Worst aspect, I'm off on Holiday next week, so no one here to take deliveries and they'll end up being sent back before I can collect

Update (13-04-12): UPS tracking now saying missed delivery from today even though I was in. And, with no calling card left, I have no UPS InfoNumber [TM] to arrange collection in person or an alternate address... Totally and utterly peeved off ... Next UPS delivery attempt is Monday by 12:00, I'm leaving at 10:30 Monday... fingers crossed.

Update (13-04-13): Amp PCB order has been placed.
Attached Thumbnails
Click image for larger version

Name:	LPDA_layout_1.jpg
Views:	1280
Size:	132.1 KB
ID:	956   Click image for larger version

Name:	LPDA_layout_2.jpg
Views:	357
Size:	116.1 KB
ID:	957  
Posted in Uncategorized
Views 827 Comments 0
Total Comments 0


Hide this!Advertise here!

New To Site? Need Help?

All times are GMT. The time now is 07:07 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2