diyAudio - Entries for April 19, 2013
Go Back   Home > Forums > Blogs > BuildMeSomething

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Old

Progressing - Low Power Desktop Amp

Posted 19th April 2013 at 10:49 AM by BuildMeSomething
Updated 25th April 2013 at 09:36 AM by BuildMeSomething

Holiday: Bad weather to a point it was near impossible to take a steady photograph due to the gusting winds. Hiding from the winds meant poor vantage points, very much non-idealistic for photographing landscapes.

Digi-key: The order turned up on the Monday morning, roughly 10 minutes before leaving. The PSU boards must have arrived mid week, a neighbour had those...

The parts order was enough components for one power supply and one amp. The PSU is assembled but untested as yet. The toroidal and 10K Alps RK27 are to be ordered from RS Components later today.

PCB issues: C1-C6... this is where trusting the people who generate default libraries for FreePCB falls down and my inexperience shows. Lead diameter on the caps is 28MIL, default part through-hole diameter is 28MIL... Each lead needed a quick file to reduce its width enough to fit the board. No other issues to report.

I don't think I could have made the overall size of the board...
Attached Thumbnails
Click image for larger version

Name:	BMS_PSU_1.JPG
Views:	171
Size:	327.1 KB
ID:	960   Click image for larger version

Name:	BMS_PSU_2.JPG
Views:	174
Size:	316.9 KB
ID:	961   Click image for larger version

Name:	BMS_PSU_3.JPG
Views:	166
Size:	323.9 KB
ID:	962  
diyAudio Member
Posted in Uncategorized
Views 369 Comments 0 BuildMeSomething is offline
Hide this!Advertise here!

New To Site? Need Help?

All times are GMT. The time now is 12:04 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2