diyAudio - Solid state
Go Back   Home > Forums > Blogs > Bas Horneman's diyAudio.com blog

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Solid state Adventures into the solid state world. I guess the main reason being to do a reality check and to be able to talk about other things than tubes.
Old

A few pcb's more...

Posted 7th December 2009 at 09:40 PM by Bas Horneman (Bas Horneman's diyAudio.com blog)
Updated 7th December 2009 at 09:58 PM by Bas Horneman

With a dayjob and other "stuff" in my life. I don't always feel like conquering the cold and messy shed to go do some drilling. But I usually have other projects running parallel that I can do something on. Pictured here is the Pass B1 and the lightspeed pcb's. Stuffed...primarily because..... that way I won't loose parts in my messy hobby room.
Click the image to open in full size.

The Kendeill caps were too big for the B1 board. So I soldered the neg terminal to the neg hole in the pcb and wired the plus to the positive rail.

The wires of the 10uF cap I bent to go beneath the pcb and almost touch. I did this on purpose because I have some 0,22uF smd caps that will act as bypass for the Audyn polyprops. They will go between them wires there.
Click the image to open in full size....
Attached Thumbnails
Click image for larger version

Name:	b1lspcbs.jpg
Views:	14807
Size:	127.0 KB
ID:	77   Click image for larger version

Name:	b1err.jpg
Views:	14629
Size:	92.9 KB
ID:	78   Click image for larger version

Name:	thin.jpg
Views:	1100
Size:	88.6 KB
ID:	79  
Bas Horneman's Avatar
diyAudio Moderator Emeritus
Views 1072 Comments 0 Bas Horneman is offline
Hide this!Advertise here!

New To Site? Need Help?

All times are GMT. The time now is 04:05 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2