diyAudio - arumugam
Go Back   Home > Forums > Blogs
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

Regarding the I2S lines

Posted 8th July 2011 at 01:19 PM by arumugam


I have an Issue in my system to interface the I2S lines interface with Digital amplifier.I have the seperate signal processing board and I'm taking the I2S,BCLK,LRCLK outputs through Buffer(74LVC244) and in AMP board the signal is mapped to I2S to PWM converter.I placed a series termination resistor as 47E in all the signal lines in AMP board.In this condition,I could not listen the audio in the speaker and when I change the BCLK resistor as 1K keeping the other resistors as 47R then I could listen the audio output.Here I'm using the single core shielded cable with the length of 30cm to interface the amp and signal processing board..

Could anyone advice me reason behind this cause?

Thanks in Advance-Arumugam.
diyAudio Member
Posted in Uncategorized
Views 984 Comments 0 arumugam is offline
Hide this!Advertise here!

New To Site? Need Help?

All times are GMT. The time now is 08:41 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2