I returned to DIY electronics in 2009 after a 20 year pause by building a few kits to get in shape. This blog is for me to keep track of my progress.
Lm60 from AmpsLAB
Last year I got an Lm60 kit from AmpsLAB. This year, I finally got an enclosure from Design Build Listen and a power supply and built it. Each channel is built on a small (120x60mm) one-sided PCB and uses one 2SK1058+2SJ162 pair in the output stage. With proper biasing, the sound is good, esp. for such a simple and compact design. I should have started with this one, rather than with the (equally inexpensive) K-8LS.
Total Comments 0