First prototype PCB-based hexacap - diyAudio
Go Back   Home > Forums > Blogs > abraxalito
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Rate this Entry

First prototype PCB-based hexacap

Posted 21st July 2014 at 11:59 PM by abraxalito

Seeing as building hexacaps with wire is very time consuming, I'm investigating ways to get the production cost down. Here's my first attempt at a PCB hexacap, using 2oz copper - I did the layout on EasyEDA - Web-Based EDA, schematic capture, spice circuit simulation and PCB layout Online

Once I've ironed out the minor errors on the groundfill I'll make the PCB public so anyone can order up their own. There are 127 caps on this board giving a 50Hz capacitive reactance just under 8mohms.
Attached Thumbnails
Click image for larger version

Name:	PCBhexa.jpg
Views:	1143
Size:	134.0 KB
ID:	1355  
Views 1286 Comments 2
Total Comments 2


  1. Old Comment

    Have you build any other models for different capacitance values?
    Posted 28th November 2015 at 05:57 AM by jayrogers1306 jayrogers1306 is offline
  2. Old Comment
    abraxalito's Avatar
    The PCB accepts any 10mm diameter capacitor so its not for any particular capacitance value. I'm currently building a 100V one with 100uFs for example.
    Posted 6th December 2015 at 11:40 AM by abraxalito abraxalito is online now
Hide this!Advertise here!

New To Site? Need Help?

All times are GMT. The time now is 10:19 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2