Just for fun - an ultra-low impedance AIF - diyAudio
Go Back   Home > Forums > Blogs > abraxalito

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Rate this Entry

Just for fun - an ultra-low impedance AIF

Posted 19th June 2014 at 12:40 AM by abraxalito

DIYing high enough Q inductors for anti-imaging filters is a bit of a challenge so here's another way to approach this. I found its possible to build very high Q inductors by simply slipping ferrite beads over a fairly thick copper wire. The limitation though is that the beads I have offer about 1.2uH per bead. So making a ferrite bead version of a 660uH inductor will call for over 500 beads - rather impractical.

To make such a ferrite bead inductor filter a practical possibility its necessary to work at a much lower impedance. I've taken a 1ohm working impedance inititally to develop this filter. Now the largest inductor just needs 10 beads. Given this very low impedance the post-amplifier's noise performance becomes rather a challenge - but a transformer will probably do the trick nicely. I plan to try this with a 1:7 step up trafo and see how it goes.

This kind of filter is probably very suitable for DACs with higher output current - the communications type usually give 20mA so I'll investigate whether the inductors maintain their high Q at such currents.
Attached Thumbnails
Click image for larger version

Name:	ultra-low-Z-AIF.jpg
Views:	82
Size:	32.9 KB
ID:	1308  
Posted in Uncategorized
Views 276 Comments 0 Email Blog Entry
Total Comments 0

Comments

 
Hide this!Advertise here!

New To Site? Need Help?

All times are GMT. The time now is 05:33 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2