diyAudio - Entries for September 6, 2013
Go Back   Home > Forums > Blogs

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Old

TL431 output filter for TDA1543 current source elimination

Posted 6th September 2013 at 05:45 AM by abraxalito
Updated 6th September 2013 at 06:10 AM by abraxalito

Here's what I've ended up with in my SDcard DAC for eliminating the pull-up current sources within the TDA1543 - a heavily filtered 3.75V reference. For a single TDA1543 just connect the L and R 870R resistors to the output of this filter instead of the normal connection to 0V. Then the input's fed with the TL431 - I'm using 3k and 1k5 output voltage setting resistors. The first resistor and inductor on the left are my attempt to simulate the output impedance of the 431.

The electrolytics are Sancon 16V types with 0.1R ESR - the 440uF being made of two in parallel. The inductors need to have the right ESR (about 0,1ohm also) for which I had to wind my own 68uH - the ready made ones I have are too lossy Varying these parameters might result in a lumpy frequency response.

Attenuation is -70dB by 20kHz but almost flat to 1.6kHz and output impedance remains low down to DC.

Eliminating the current sources means that pin7 of TDA1543 now goes unconnected....
Attached Thumbnails
Click image for larger version

Name:	TL431-output-filter.png
Views:	532
Size:	7.4 KB
ID:	1122  
abraxalito's Avatar
diyAudio Member
Views 916 Comments 3 abraxalito is online now
Old

Tweaking the TDA1543 SDcard player

Posted 6th September 2013 at 01:05 AM by abraxalito

This board is really a fun one to tweak mainly because its so simple and relatively self-contained, so results of mods can be verified very quickly.

In stock form, the sound is fairly typical 1543, nothing unpleasant but an almost total lack of soundstage depth. On recordings with a high ratio of ambient to direct sounds (Nimbus) the acoustic cues are muddied. The flatness of presentation is one of the reasons I was so slow to accept 1543's other virtues during the course of development of my DACs. Soundstage depth is a biggie for me. There's also a lack of 'finesse' on the HF - lack of 'poise' or 'delicacy'.

I started by fixing up the grounding to enforce a star earth on the analog outputs and power supply. Then went on to filter the DAC's supply regulator (7805) with series ferrite beads and additional lytics and ceramics. It later transpired that the beads were being shorted by a parallel track on the other side of the board. I installed filtering prior to...
abraxalito's Avatar
diyAudio Member
Views 554 Comments 5 abraxalito is online now
Hide this!Advertise here!

New To Site? Need Help?

All times are GMT. The time now is 05:05 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2