diyAudio - Entries for June 5, 2013
Go Back   Home > Forums > Blogs

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Old

Better sounding anti-imaging filter

Posted 5th June 2013 at 01:46 AM by abraxalito
Updated 5th June 2013 at 02:00 AM by abraxalito

Still in the vein of AIF designs which utilize off-the-shelf inductors, I'm currently listening to this one and its thoroughly enjoyable. I built it with some very cheap bobbin-wound (unscreened) 10mH chokes I found on Taobao.

I don't recommend using unscreened inductors for this but if that's all you have the results are still aural candy. They do pick up a little low level mains hum, not noticeable except when close to the speaker. Also they interact - when I was checking the prototype filter for continuity I hooked up the LCR meter to the 4 inductors in series and found different answers - none measured 40mH. The result was from 32mH to 45mH (from memory - my filters are balanced so I have four sets of series Ls). I have them spaced apart by almost one coil diameter (about 6mm) so if you're going to build this I suggest greater spacing.

You'll note that this one's industrial strength in terms of its stop-band rejection - around 60dB. Whether this is obtained...
Attached Thumbnails
Click image for larger version

Name:	4inductor-AIF.png
Views:	345
Size:	12.7 KB
ID:	1091   Click image for larger version

Name:	4inductorAIF-plot.png
Views:	186
Size:	3.6 KB
ID:	1092  
abraxalito's Avatar
diyAudio Member
Views 478 Comments 0 abraxalito is offline
Hide this!Advertise here!

New To Site? Need Help?

All times are GMT. The time now is 09:16 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2