diyAudio - Entries for February 19, 2013
Go Back   Home > Forums > Blogs

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Old

Line input RF reject filter

Posted 19th February 2013 at 07:24 AM by abraxalito
Updated 26th February 2013 at 03:09 AM by abraxalito (Added zoomed passband plot)

I've only simmed this so far, no listening tests. The aim here is to have a passive filter which works into a line level impedance (i.e. 10k or greater) and which gives a decent amount of RF rejection without compromising SQ. I plan to incorporate it behind the RCA input jacks of my chipamp.

Design-wise, it started life as a simple 2nd order filter with single series L and shunt C. But when it came to wind the inductor I didn't have a wire diameter small enough to make the required value (44mH). So I split up the inductor into 2 * 22mH and then couldn't resist hanging a cap off the centre tap. The result has turned more into an over-damped elliptic with a higher corner frequency than the original, but with an impeccable phase response to 20kHz. The elliptic-type plot comes about because of the SRF of the two inductors (around 350kHz).

Since fas42 remarked on the phase performance, I've added the group delay plot for the passband. Almost pure time delay of...
Attached Thumbnails
Click image for larger version

Name:	passive-line-input-filter.png
Views:	315
Size:	7.2 KB
ID:	878   Click image for larger version

Name:	passive-line-FR.png
Views:	195
Size:	5.3 KB
ID:	879   Click image for larger version

Name:	passive-line-input-zoomed.png
Views:	161
Size:	5.9 KB
ID:	880   Click image for larger version

Name:	28mH-chokes.png
Views:	248
Size:	338.7 KB
ID:	881  
abraxalito's Avatar
diyAudio Member
Posted in Power chip amps
Views 1090 Comments 8 abraxalito is online now
Hide this!Advertise here!

New To Site? Need Help?

All times are GMT. The time now is 02:27 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2