diyAudio - Entries for December 27, 2013
Go Back   Home > Forums > Blogs
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Old

Ultimate SQ DAC

Posted 27th December 2013 at 06:08 AM by abraxalito
Updated 30th December 2013 at 12:52 AM by abraxalito

Inspired by this thread http://www.diyaudio.com/forums/digit...-new-post.html
I've been giving a little thought for how to move beyond the 'Ozone' to a DAC able to handle more than 16bit inputs and up to 96kHz input rate. The target being 20bits and 120dB SNR (non-A weighted). The OP in that thread preferred a more marketable 'ultimate' DAC (with 192k and potentially 384k capability, along with DSD) - aims which to my way of seeing clearly conflict with a DAC having any pretentions to ultimacy.

The simplest solution - building on the digital part I already have - would be to add more TDA1545As in parallel and with a Cortex M4 direct the data to the respective chips. What's unclear though is how low the noise will go when the extra chips are added. From the DS, an A-weighted SNR is quoted of 101dB (typ) with 2mA, however this is a static noise (code = 0) and hence may well not translate to the noise achieved with bits toggling....
abraxalito's Avatar
diyAudio Member
Views 1063 Comments 2 abraxalito is offline
Hide this!Advertise here!

New To Site? Need Help?

All times are GMT. The time now is 03:03 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
Copyright 1999-2016 diyAudio

Content Relevant URLs by vBSEO 3.3.2
Wiki