Go Back   Home > Forums > Blogs
Home Forums Rules Articles Store Gallery Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Old

How much power is enough for an amp?

Posted 2nd January 2012 at 02:09 AM by alexcp (My DIY projects)

Bruno Putzeys posted:
About power ratings, well... Normal "critical listening" levels hover around a long-term average of 85db SPL at the listening position. If we're assuming uncorrelated signals (rather inaccurate assumption but it'll do for the purpose) that is 82dB SPL for each speaker alone. Crudely calculating back from a 2m listening distance to the 1m standard measuring distance that's 88dBSPL, one speaker, one meter. It's not unusual for speakers to have an efficiency of 88dB/1w/1m so 1W is roughly the required amplifier power.

The current crop of unlistenable hypersquashed pop music has a peak to average range of around 4dB. So all it takes to reproduce pop at a reasonable level without clipping is a 4dBW (2.5W) rated amp.
Before the loudness war got into swing (say until the early 90's) peak-to-average ranges up to 14dB could be found in mainstream music. To play Sultans of Swing at the same average level requires an amp rated at 14dBW
...
alexcp's Avatar
diyAudio Member
Posted in Speakers
Views 810 Comments 0 alexcp is offline
Old

Improved current source

Posted 2nd January 2012 at 12:18 AM by klewis

http://www.diyaudio.com/forums/solid...urce-sink.html
klewis's Avatar
diyAudio Member
Posted in Uncategorized
Views 326 Comments 0 klewis is offline
Hide this!Advertise here!

New To Site? Need Help?

All times are GMT. The time now is 11:33 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2013 DragonByte Technologies Ltd.
Copyright ©1999-2013 diyAudio