I have used a diy fluid for drilling for the first time. Used bicycle chain oil...water and detergent. Quite happy with it. Drilled the largest hole yet. And it looked almost professional.

Also a photo of the oak enclosure after it was treated with boiled linseed oil. The oil makes the oak enclosure look a lot better, it really brings out the grain. As usual I don't have "before" pictures to show the difference. (the pictures below had a partial coat already)

I'm not sure what to seal the wood with. Suggestions are welcome. Right now I'm thinking about shellac.

i dont know if i am doing this right, but i need a potentiometer for a cyrus2 amp, and any metal casings for the toggle on/off switch variety including the psx.cyrus do not supply spares, having tried on numerous occasions, and getting nowhere. please help, there must be one out there somewhere. my email is scotchb@fsmail.net. awaiting reply in ernest. cheers.

Unlike the mid and woofer - the tweeter doesn't seem to show any gains under current drive.

Some decent reductions in 3rd harmonic.