diyAudio - 2 picoDumbs
Go Back   Home > Forums > Blogs
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Old

F6 Adventures

Posted 18th December 2015 at 03:36 AM by 2 picoDumbs
Updated 4th February 2016 at 10:58 PM by 2 picoDumbs

Contained here are all my observations with this amp.

1) The schematic the DIYAUDIO Store PCB is based on does not allow 2nd harmonic adjustment through changing source resistor values.

2) The PCB circuit can be changed to the original degenerating circuit by moving cap leads to other side of resistor lead. This will restore 2nd harmonic adjustment through source resistance modification.

3) Output impedance also appears to be significantly affected (only tested in simulation).

4) As an alternative to the PCB mod, 2nd Harmonic adjustment can be altered on PCB circuit by selecting devices with different transconductance curves if one does not want to modify the PCB.

5) As an alternative to performing transconductance measurements and selecting non-matched devices for 2nd harmonic addition, installing one IRFP250 and one IRFP240 per channel will also give a dominant 2nd harmonic.


Continue reading
...
2 picoDumbs's Avatar
diyAudio Member
Posted in Uncategorized
Views 1264 Comments 0 2 picoDumbs is offline
Old

Speaker Building

Posted 23rd October 2015 at 03:10 AM by 2 picoDumbs

Testing compression driver

https://youtu.be/KMe5_nNoAD0
2 picoDumbs's Avatar
diyAudio Member
Posted in Uncategorized
Views 582 Comments 0 2 picoDumbs is offline
Hide this!Advertise here!

New To Site? Need Help?

All times are GMT. The time now is 03:17 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2
Wiki