Go Back   Home > Forums > > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Aussie Amplifiers High quality, high performance amplifier modules and accessories

Thread Tools Search this Thread
Old 20th January 2014, 08:10 AM   #1
dvb projekt is offline dvb projekt  Germany
diyAudio Member
dvb projekt's Avatar
Join Date: Feb 2009
Location: Willich, Germany
HPA-nxVolt One - Low Voltage Version
Exclamation HPA-nxVolt One - Low Voltage Version

Hi Anthony,

itīs a great idea to sell the HPA-nxVolt One also as low voltage version!

Now you have two great small adjustable regulators with Positive and Negative rails,
providing a well regulated output at any voltage setting and with a ripple rejection
of around -80dB and a low dropout voltage of 5.0 volts dc.

Click the image to open in full size.

HPA-nxVolt One standard: +-38 volts to +-90 volts / up to 200mA continuously

HPA-nxVolt One low voltage: +-9 volts to +-21 volts / up .......mA continuously

Could you add the useable continously current for the LV Version?

Best regards,

Reference TDA1541A DAC project PCBīs / Tube-I-zator PCB
Stock status in my Blog
  Reply With Quote
Old 20th January 2014, 11:10 PM   #2
The Saint is offline The Saint  Australia
diyAudio Member
Join Date: Jul 2002
Location: Launceston, TAS, Australia
Hi Oliver

Sure, the low voltage version can handle output currents as high as 1 Amp continuous.


  Reply With Quote


HPA-nxVolt One - Low Voltage VersionHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
HPA-nxV300 & HPA-nxV300se what's the difference? pcsl999 Aussie Amplifiers 14 3rd September 2013 11:24 PM
given choice of low screen voltage or low bias which sounds better or is it equal ryuji Tubes / Valves 2 23rd March 2012 02:32 PM
Why high voltage Fets when low voltage types gives less distortion? Circlomanen Pass Labs 21 9th December 2009 10:43 PM
AIKIDO - Low-volage with buffer version Mrpong Tubes / Valves 3 11th September 2007 04:49 PM

New To Site? Need Help?

All times are GMT. The time now is 11:43 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio