My Holton amp builds.

[StevenZ]

Lovely builds. Wish I could commission you to build one for me.

 

[Leikis]

I can build for you No problem

 

[Leikis]

My last Holton build is an 800L.
Modushop 5U 500mm chassis. It mabye oversized, but it gives me romm for some extra bias
2 x 750VA 2x55v toroids. Holtons PSU-Three with Elna 10000uF 100volt. And ofcourse the PowerOne 3.0 board.

 

[Erlend Sæterdal]

Nice build

 

[Leikis]

My last creation is a 800R2 dual mono.
2 1000VA toroids fron Noratel.
A simple psu with 6 4700uF and 6 2200uF for eatch channel.
Modushop 5U chassis.

 

[Leikis]

Inside

 

[Leikis]

Toroids.

 

[Leikis]

And working on another, 500V1 boards, changing the cheac yellow caps with Nichicon fine gold 47uF 100v caps. And changing the blue resistor for zobel with Takman carbon film. Some say that this is a good uppgrade, lets see ore hear

 

[Leikis]

Getting closer.

 

[Leikis]

This is what my Holton amps are working with

Diy towers with 8 Infinity Emim midranges and one Emit tweeter. I think final version will have 9 Emims foreach tower.
Bass tower are Dayton PA-380 12" woofers 6 for each tower.
Corner sub is Ficar IB18, 2 for each side.
Al speakers are dipole !

 

[Leikis]

The Holton 500V1 is now playing, first impression is very good as alway with Holton amps.

Holton chassis.
Toroid from Adyton XP3D 1000VA 2x56V.
Psu is a mix of Roe 2200uF 100V and Nichicon 2200uF 100V 20 pc for aech side giving 44000 uF for each channel.
PowerOne v2 and soft start,
Neutrick gold Xlr. VanDamme xlr mic cable.
Gaofei speaker terminal wit MIT T2 cable.
Al power cables is solidcore 2,5kv.

 

[Leikis]

The heatsinks for my 50L amp, still waiting for the amp boards.

 

[Leikis]

Some work on the last 500L build.

 

[Leikis]

The 500L in progress.

 

[The Saint]

Hi Oyvind

Your builds are looking great as always.
Looking forward to seeing the finished 50L Class A amplifier.

Cheers Anthony

 

[Leikis]

Hi Oyvind

Your builds are looking great as always.
Looking forward to seeing the finished 50L Class A amplifier.

Cheers Anthony

Thanks.
And i realy looking forward to hear the 50L on my Infinity towers
Besides the 500L work i have started on the 50L chassis

 

[Leikis]

The 500L is finished, some bias adjustment and listening left

Now i ca consentrrate on the 50L

 

[Leikis]

Cooling for the 50L class A amp in progress.

 

[Leikis]

Some more work on the 50L, thrown in some stuff to see if there is room for everything.

2x50L boards.
2x 630VA 2x25v
2x 50VA 2x32v
40pc Nichicon KW 2200uF 63v for each channel.
PowerOne
And som more stuff.
As usual al solidcore for ac and supply for the amp board.
The chassis is a 4U modushopp with Pass look heatsink.
3 heatsink for eatch channel each is 12cm wide, 18cm high and 6,5 cm deep.

 

[Leikis]

Some progress on the 50L. One aluminium plate mountet to the heatsink and the 50L board mounted. And 80 pcs of the Nichicon glued to the plexi plates