diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Aussie Amplifiers (http://www.diyaudio.com/forums/aussie-amplifiers/)
-   -   nxV recommendation for Magnepan MG 3.7 (http://www.diyaudio.com/forums/aussie-amplifiers/201941-nxv-recommendation-magnepan-mg-3-7-a.html)

dvb projekt 6th December 2011 02:13 PM

nxV recommendation for Magnepan MG 3.7
 
Hello Anthony,

could you recommend (sound quality 1st!) one of your mono nxV modules
for the Magnepan MG 3.7 ?

http://www.magnepan.com/content/bina...rs/MG37_01.jpg


Best regards,
Oliver

The Saint 6th December 2011 07:24 PM

Quote:

Originally Posted by dvb-projekt (Post 2808898)
Hello Anthony,

could you recommend (sound quality 1st!) one of your mono nxV modules
for the Magnepan MG 3.7 ?

http://www.magnepan.com/content/bina...rs/MG37_01.jpg


Best regards,
Oliver


Hello Oliver

To drive the magnepan I would recommend the nxV500 module or the nxV300
for best sound quality.

I hope this helps Oliver.

Kind regards

Anthony

dvb projekt 7th December 2011 05:25 AM

Hello Anthony,

next saturday i go to my Magnepan dealer and make a listening session...

Let's see if they could beat my Duo Omega horns...:rolleyes:

If so, i must also change my 300B mono's to a new SS amp ;)


Best regards,

Oliver

The Saint 7th December 2011 10:36 AM

Quote:

Originally Posted by dvb-projekt (Post 2809932)
Hello Anthony,

next saturday i go to my Magnepan dealer and make a listening session...

Let's see if they could beat my Duo Omega horns...:rolleyes:

If so, i must also change my 300B mono's to a new SS amp ;)


Best regards,

Oliver

I will look forward to hearing how it you went.

dvb projekt 7th December 2011 10:47 AM

Quote:

Originally Posted by The Saint (Post 2810128)
I will look forward to hearing how it you went.

I will report back ;)

BTW, how much current max. needs the nxV500 form the PSU?
Just for calculating...


Best regards,
Oliver

The Saint 7th December 2011 10:50 AM

Quote:

Originally Posted by dvb-projekt (Post 2810137)
I will report back ;)

BTW, how much current max. needs the nxV500 form the PSU?
Just for calculating...


Best regards,
Oliver

send me an email and I will email you back the nxv500 installation manual.
aussieamps@gmail.com

Cheers

Anthony

la1209 17th December 2011 03:17 PM

I'm now using nxV500 to drive my MG12.
My power amplifier based on nxV500 just finished a few hours before, I will post some pics here later.
Thanks Anthony, you did a good job, the modules performance is very very good! Relax but no lost of details, especially the silkly high-freq, no harsh, very smooth, pin point focus, wide open sound with very good resolution!

Regards,
Kenneth Lau

The Saint 17th December 2011 10:14 PM

Quote:

Originally Posted by la1209 (Post 2824639)
I'm now using nxV500 to drive my MG12.
My power amplifier based on nxV500 just finished a few hours before, I will post some pics here later.
Thanks Anthony, you did a good job, the modules performance is very very good! Relax but no lost of details, especially the silkly high-freq, no harsh, very smooth, pin point focus, wide open sound with very good resolution!

Regards,
Kenneth Lau

Thanks Kenneth

I am very happy you like the nxV500 sound and build quality.
I look forward to seeing some of your photos of your build.

Cheers

Anthony
Aussie Amplifiers

la1209 18th December 2011 03:08 AM

My amplifier is built with a custom made heavy duty full aluminium chassis sized W430 H200 D412, two Nuvotem 625VA trans with 2*55V-0 secondary, dual mono configuration with one channel two Vishay BC 154 33000uF/100V capacitors, and a soft-start module is installed that designed by my friend in HK, no speaker protection broad install because I found that amplifier modules is very stable, so I haven't install it.

http://a4.sphotos.ak.fbcdn.net/hphot...85875967_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot...01046750_n.jpg

http://a5.sphotos.ak.fbcdn.net/hphot...54307247_n.jpg

http://a3.sphotos.ak.fbcdn.net/hphot...58459949_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot...65421978_n.jpg

The Saint 18th December 2011 03:54 AM

Quote:

Originally Posted by la1209 (Post 2825210)
My amplifier is built with a custom made heavy duty full aluminium chassis sized W430 H200 D412, two Nuvotem 625VA trans with 2*55V-0 secondary, dual mono configuration with one channel two Vishay BC 154 33000uF/100V capacitors, and a soft-start module is installed that designed by my friend in HK, no speaker protection broad install because I found that amplifier modules is very stable, so I haven't install it.

http://a4.sphotos.ak.fbcdn.net/hphot...85875967_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot...01046750_n.jpg

http://a5.sphotos.ak.fbcdn.net/hphot...54307247_n.jpg

http://a3.sphotos.ak.fbcdn.net/hphot...58459949_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot...65421978_n.jpg

Hi Kenneth

Your nxV500 amplifier looks awesome!
Well done on the construction.

Oliver how did you go with the MG speaker audition?

Regards

Anthony
Aussie Amplifiers


All times are GMT. The time now is 07:27 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2