Audio Selector Site Down? - diyAudio
Go Back   Home > Forums > Commercial Sector > Vendor Forums > Audio Sector
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Audio Sector Kits & PC boards from AudioSector

Reply
 
Thread Tools Search this Thread
Old 17th November 2016, 02:09 AM   #1
diyAudio Member
 
Join Date: Dec 2015
Default Audio Selector Site Down?

Went online to download the usage guides so I can start prepping my powersupply and designing my chassis - and the site I ordered my kit from appears down!

http://www.audiosector.com/

Right?

Two things - anyone have a copy of the .pdf you could share, and two - anyone know if this is actually the official site? I assume it is just a site maintenance or something to that ilk, -

Thanks in advance,

Ewing

Last edited by ewingfox; 17th November 2016 at 02:53 AM.
  Reply With Quote
Old 17th November 2016, 01:43 PM   #2
diyAudio Member
 
Peter Daniel's Avatar
 
Join Date: Jul 2002
Location: Toronto, Canada
Send a message via AIM to Peter Daniel
The site is temporarily down due to some HDD errors, that's the lates info I got from site administrator. The are working on fixing it now.

The manual can be found here: Commercial Gainclone kit- building instructions

If you have any aditional questions, don't hesitate to ask them here.
__________________
www.audiosector.com
“Do something really well. See how much time it takes. It might be a product, a work of art, who knows? Then give it away cheaply, just because you feel that it should not cost so much, even if it took a lot of time and expensive materials to make it.” - JC
  Reply With Quote
Old 17th November 2016, 02:01 PM   #3
diyAudio Member
 
Join Date: Dec 2015
Default Thanks Daniel!

I am eagerly awaiting my order! I live in South Canada (Northern Vermont) so it is always either really fast! or really, really slow

Ended up going with the alternative torrid you suggest, the antek unit for this build, but may upgrade it. Have some questions about how the dual mono topology will work, but I'd rather RTFM before pestering all of the good folks here on the forum!

There was a "usage guide" pdf that I saw on your site - is that gone and lost? i found it to be very helpful, but I didn't download it and my temp cache has been cleared!

Take care, and good luck with the HDD recovery,

Ewing
  Reply With Quote
Old 17th November 2016, 05:53 PM   #4
diyAudio Member
 
Peter Daniel's Avatar
 
Join Date: Jul 2002
Location: Toronto, Canada
Send a message via AIM to Peter Daniel
The pdf is too big to put it here, but it will be available on a website when it's up and running again.

Dual mono is only recommended when two toroids are being used, with one toroid, use only one rectifier board.
__________________
www.audiosector.com
“Do something really well. See how much time it takes. It might be a product, a work of art, who knows? Then give it away cheaply, just because you feel that it should not cost so much, even if it took a lot of time and expensive materials to make it.” - JC
  Reply With Quote
Old 28th November 2016, 10:35 PM   #5
diyAudio Member
 
Join Date: Dec 2015
Kit arrived last night and my gawd you sell a beautifully printed board! Still have to do a parts inventory check and ferret over the build forum before I start the build!
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
vintage vacuum audio site opcom Tubes / Valves 1 18th May 2013 10:08 PM
Audio site Danger Trojan wazz The Lounge 30 16th February 2012 08:26 PM
New Audio Equipment Auction Site!! Minion Swap Meet 0 19th October 2007 05:22 PM
Used audio Site timcatn Everything Else 1 25th August 2006 07:22 PM
audio newbs site... Nanook Everything Else 5 6th March 2006 12:55 PM


New To Site? Need Help?

All times are GMT. The time now is 12:40 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2
Wiki