Using a single channel on a t-amp

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
I had asked about this a long while back but the project got shelved

I've started again and picked up one of these http://www.richersounds.com/showproduct.php?cda=showproduct&pid=KENS-SX2000

My plan is to build a compact self amplified single speaker for holidays and camping

When I asked before it was suggested that i should use the left and right channels to power the tweeter and driver seperately

But seeing as the t-amp is bridged already would there be a problem in just using a single channel from the amp leaving the other channel open

The reasons for wanting to do this is one simplicity and also it leaves me the option to build a secong speaker and then connect it to the open channel
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.