View Full Version : Multi-Way
- to make a center speaker with mid-range drivers of KEF 104ab
- Opinions on Eminence Alpha a 15"
- Speaker Protection Problem
- Anyone build this Seas all metal 3 way?
- speaker design for high freq. hearing loss
- Help with a two way open baffle hybrid
- Help needed with tweeter/crossover
- Help finding right driver
- High and wide enclosure?
- tweeters for JBL D130's
- I would like assistance building a Passively X-Overed 3 Way Speaker.....
- 1.5" Ciare MT320 Mounted in a Modified 12" PE Waveguide
- Nube questions tweeter selection and cabinet shapes
- "Green" OB speakers project
- Pierre Etienne Leon Integrale speakers. Help!
- Upgrading crossover - Monitor Audio Silver 9
- Dayton dc250-8
- Is this a reasonable "dream build"?
- Adapting small drivers to a TL
- Adding super magnet to tweeter; any experience?
- HELP!! Creating 3 way with woofer being powered
- Looking for Advent One tweeters
- Best speaker kit for 40L enclosure
- Need simple mod help
- DA-175 v/s SB17
- DAYTON DRIVER SEARCH
- please help to build a 3 way X-over
- Impulse buy, 4 pcs JBL 2226J, need suggestions
- Istoc 3-way XO rework
- Do sound recordists compensate for bass roll off on our speakers?
- White Paper: Phase Issues and Crossover Considerations in Loudspeakers
- 1" compression driver recommendations?
- Vitavox S2 x JBL 2435hpl
- Analysis Paralysis: Need help moving forward
- Volume size box help.
- Question on active speaker possible patent
- What do you think of this Pluto variation?
- Bought a pair of QUAD active 11L speakers
- Bass drivers which cleanly roll-off without a low pass filter.
- Bargain ? Mission Argonauts for 180 Euro
- Unknown Dynaco/Scandyna 3-way loudspeaker
- Cap Dilema
- 2-way + sub or 3-way + sub in a smallish room
- Bump at 120 Hz with large inductor before woofer?
- Peerless HDS 830860 with XT25SC90-04 or DQ25SC05-04
- Need help with 2 way crossover design
- Calling All LSPCAD Gurus
- Speaker Connection
- KEF Museum
- How to Design Loudspeakers without Performing Measurements
- The magnet on my Tannoy is loose, and it not tight on the basket, is this fixable?
- about volume
- RCF 13360051 Phase Plug 10" cabinet ideas?
- which kind of small speaker is best?
- Dampening LaScala bass bins with sand?
- BMS 15CN860 triaxial speaker
- Help understanding the physics of Vas
- Precise Acoustic Laboratories
- 15" mid-woofer - 80 Hz to 1 KHz - for a sealed cabinet
- First DIY / KINDA DIY BUILD...
- Calculate maxSPL
- can someone help build me a passive crossover design?
- JBL L100 restoration and upgrade
- Help needed 40Hz to 450Hz
- Turning Japanese...
- translinear speakers: any info on these speakers
- Looking for B&W DM7 tweeter drivers
- SEAS Prestige 2.5 way
- The Acusticon: My first designed speaker
- Best buy bookshelf speaks...look at this: how could it sound?
- Hiquphon OW1 combined with ? in 3 way speaker
- Usher S-520 question...
- DIY bass compression drivers
- How to select Scan speak drivers
- Do Thiele-Small numbers trump construction?
- tda2030a 3way amplifier problem ??????
- Just a Tease on Bass Driver Positioning
- Car Speakers and Thiele-Small Parameter Question
- source for baltic birch?
- Compression Driver for the IWATA-300
- Design Check!
- MTTM advantages/disadvantages?
- Fast blow AGC fuses vs polyswitches
- Wanted: technical sheets for Fostex RM760 studio monitors
- suggestions on a suitable amp for ZD5.
- New builder just started AviaTrix sealed kit from Parts Express
- The best books to buy on speaker design and construction
- Mitsubishi-M-S4380-3-Way-Speaker
- what are you thoughts on Vishay MKP1837 (a.k.a. ERO MKP1830)?
- Zu Audio Dominance
- Best enclosure for Dalquist Speakers
- hourglass shaped enclosure
- Vintage Polks
- Pair of woofers with different Re's?!
- my new project 6,5 - 2-way
- Which Chinese brand speakers
- plz suggest system configuration
- Which speaker is this?? DIY???
- Anyone using woofer tester 3? - little help needed.
- 2-way system match for JBL 2441
- 10'' or 12'' OB coax drivers
- Vertical mount of Econowave horn
- Zobel networks in an active speaker/crossover
- Do coaxial woofers perform as well as dedicated woofers?
- Free the Chassis
- Modding a pair of electrovoice EV1B W horns For Hi Fi
- Magnet replacement on Mission 707 driver
- Would someone assist me with a calculation?
- converting passive speakers to active
- AudioTechology - Seas - Scanspeak bass comparison
- Back Loaded Horns
- Name that Altec lansing Cabinet
- wanted: opinions on Pioneer midrange
- Experience with these drivers?
- which 8" driver for DIY build?
- Suggestions for a 2-way Floorstander design
- Tweeter for Lowther
- Tannoy T165 10" Dual Concentrics on eBay (UK)
- Which is the correct FRD for WM 61
- DCM Time Window 1a clone - can it be done?
- 2 way design proposal- would appreciate help
- Opera Quinta - phase
- A look at speaker cones - a tutorial
- More crossover help
- My Audio Physic Avanti IIIs have a lower-MR driver that covers 200 - 500Hz...
- Newbie Q:Importance of voice coil inductance in Direct Radiator design.
- What to do with these crossovers?
- Two way DIY to rival Proac?
- Suggest me a speaker to build (first timer)
- help with Peerless India drivers
- Crossover designing help needed.
- Coral H-105 Super tweeter
- Pls help re-boxing Energy Speakers
- Mission 707
- Zaph WG-TMM Woofer Polarity
- my speaker gurus
- I think you'll enjoy the "value" of this one..
- Need Help to repair my Sony SS-X7 speakers
- Accuphase F-25 Japanese manual translation help!
- Rectilinear III buzz?
- D52AF vs. EM1308
- infinity sm122 crossover scheme
- What driver combination??!!
- crossovers and speakers
- Possible to repair woofer? It's buzzing
- Using Edirol PCR-1 for testing speakers
- BEYMA - CP21F worth buying for £10 each?
- Open baffle studio monitors, a good idea?
- T section ports and helmholtz resonance question
- B&W Capacitor Replacement- Need Help
- What do you think about RCF LP530?
- elliptical drivers: worse or no-different to circular?
- dayton rs150 2 way
- Source for Castle Acoustic tweeter unit
- Volt BM220DS + D2905/9300 - Kord Tornado
- Is this driver suitable for MLTL?
- Linear Phase Passive Crossover
- variable baffle step device
- Program for measuring IMD
- Center for L810s
- Voice Coil Rub
- Nameless 2-way noob speakers - from scratch.
- Please Help - Impedance confusion :S
- Toaster's OB
- Bookself speaker (2nd) for beginner
- Isophon P30/37/10 + DHB 6/2-10 drivers
- Sensitive dome tweeters
- ZaphAudio ZA5.3c_If it only came in BLACK
- What's this issue of ringing bandpass filters?
- Mexico City parts suppliers
- Tweeter problem :(
- This looks special...
- 10 pieces of peerless India 5" speaker
- How does one determine sealed or ported enclosure
- Newbie alert - First project, two way tower
- AAD 2003 tweeter
- Sealed Tymphany MTM's
- Effects of stuffing on mid-bass (?)
- Vertical offset tradeoff versus time alignment
- xt25 and ?? - in a bookshelf
- Paradigm Titan clone? Anyone made one?
- 18W/8531G00 vs 18WU/8741T-00
- 22W/4851T00
- Help with some vintage Wharfdales
- ported midranges
- spendor prelude
- What do people think about this open baffle speaker?
- The enclosure of midrange driver
- Capacitor type selection help for high pass
- Need help with 40's lap steel field coil wiring...
- Beyma 15G400+B&C DE750-8
- Peerless 830875 sealed + Seas H1189
- Salvaging Polk RT2000
- Goodman Magnum SL
- Altec 601C and the 3000.
- We know that Frequency Response isn't the end all be all... so what else is there?
- Capacitor failure modes
- eggcrate foam specs?what do they mean?
- Driver Suggestions
- Designing a dipole in a sealed enclosure
- Goldwood 12" Vented box question
- looking for recommendation for high efficiency midrange for open baffle
- Purchase / Repair of Mirage 10" Woofer?
- Looking for spec sheet - Vifa M18WO-09-06
- 2.1 speaker issues
- LF help for Fostex 108s in backhorn
- HF time delay circuit?
- Scan Speak R3004/662000 vs. D3004/662000
- Replacement driver for Altec Lansing
- What Vintage Speakers to go for!?!
- Woofer response simulation help!?!?
- My DIY Active Soundbar!
- 3 way crossover problem
- re-driver my Infinity 51i 3 ways..help please.
- 7" woofer for 2 way sealed monitor
- Newbie questions regarding alpair active OB 2 way
- Tannoy signed plan?
- Pretty simple question just checking my train of thought
- Faraday ring in louspeaker driver, what is it?
- Possible use of a very low QTS driver?
- A question about measuring passive filters...
- splicing nearfield to farfield, does this look right?
- P-13 modifications
- efficient and simple 2 way
- Constant Directivity Cornerhorns
- Zenith Allegro 3000 tweeters
- energy proo 22 trouble
- Cross Over
- Why are woofers getting so small?
- OB (with proaudio drivers) + active Xovers (via pc) (!newb content!)
- Thiele guitar cab vs. ported guitar cab
- No luck getting Minimus 77 re-foamed
- Tweeter draw lesser current than mid-woofer?
- Peerless Platinum - formerly Vifa NE
- Peerless Platinum - formerly Vifa NE
- Paper horns.
- Active 3-way with DSP
- Speaker upgrade ... transition to full DIY
- Opinion: has anyone ever used the Audax PR 17 OMO in a midrange horn?
- 15" woofer to pair with FE126e
- Speakers for T-Amp TA2020 under 200$
- Aleksandar Radisavljevic on RAAL speaker
- Sizing Inductors, current capacity
- Ciare PT383, Seas U18RNX/P crossover opinions needed
- Reverse Engineering a Double Chamber Bass Reflex
- Caps (brand & suppliers) for KEF Concerto's?
- Where to buy
- JBL L15 woofer repair question
- DIY "Single speaker surround sound"
- kef 104/2 drivers again (calling speaker dave?)