View Full Version : Multi-Way
- Stereophile Speaker Model
- Limitations of a 5.5" driver on an Open Baffle?.
- B&W 801 Series 80 protection circuit and spare parts
- HELP for change parallel design to Series design Xover
- Altec 416+605B
- Is an open baffle isobarik alignment possible or useful?
- Will you help a newcomer with his first multi-way project?
- How to design/build Dj monitors
- MTM with JX92s fullrange and Aurum Cantus G2Si ribbon tweeter - Will that work?
- When and how to use bass traps
- KEF Q90 technical information
- Good drivers for studio monitors
- BassBox PRO and F3 calculation on a 2x10" bass cab
- Box Design Software
- Need advice on horn throat modification
- What 5" to 7" midbass suits infinite baffle?
- Ultimate Solution - a 12 way loudspekersystem
- Quick hornresp question
- Active crossover question
- Beyma SMC 280/ST anyone?
- Speaker software response
- Anyone use this KRK Systems - RokitG2 6" 2-Way Powered Speaker
- Help me avoid a 5 way ??
- Cross-Over Frequency Selection
- Help needed: Planning to build a set of monitors for my home studio.
- Looking for Cheap 12/15" recommendations
- Keesonic Skouts with SEAS 21 F-WBMX ?
- speaker: type, manufactor?
- Please recommend a large 3 or 4 way design
- Cabinet Simulation for 1U Guitar Effect Chain Project
- ULTRA-high frequency driver impedance vs. Class D amps?
- advanatge of 1s order over 2nd or 3rd order?
- B and W dm220's
- Capacitor audibility: fact or fiction?
- Jensen 32 cell horn
- Weird loudspeaker problem
- Sound projector *parabolic*type*
- Dynaudio 15W75, 4 ohm worth?
- help mounting Radian CD
- Adire HE12 crossover building help...
- Bookshelf with imaging?
- New waveguide kit
- Compression driver without horn
- 'Jubilo' 3 way active loudspeakers, construction diary
- Recommend enclosure for Tesla ARO 666?
- First DIY system: 4-ways! Peerless, HiVi, TangBand, Fountek
- Bose vs DIY set up for "invisible" second system
- oriented structural split straw board (OSSB)
- Any other Clio users?
- Not Your Daddy's Dipoles
- Most powerfull 15cm Scan Speak revelator based driver
- How can I improve this DIY kit
- speakers had a voltage pulse- performance loss?
- Suggestions on amp for TAD TL-1601a as woofer 1601
- Inductor hi pass to filter low bass
- Lobing vs. comb filtering
- Statement Questions
- Krutke's best floorstanding speaker design? His fav?
- Another Open Baffle. Advice?
- Passive to active XO upgrade on ML SL3
- newbie building speakers
- Pheonix in a box - inspired by Mr Linkwitz
- BW Matrix 801 SII crossover schematics
- Possible horn?????
- TAD TL-1102 vs TM-1201 or TM-1201H
- OB advice
- Question about spl, Qts, wattage etc
- Impedance Comparisons between different measurement systems (question)
- Gedlee style speaker w/ back loaded horn, worthwhile?
- Great build going on at DIYMA
- Klipsch K-1023-K 10" speaker info needed.
- refurbishing black ash veneers
- DIY Speaker design with side woofer
- Newbie needs project recommendation
- Kef PL301?
- Question about driver impedance data
- Audio vector c2 mkii
- Crossover design for 2-way 3 driver system
- 4" (3.5"-5") high efficiency wanted please
- Why are speakers measured at 1 meter?
- HiVi/Fountek 3 way active center channel
- 'Flat' is not correct for a stereo system ?
- AV12X as woofer?
- EnABL speakers
- How to repair dust cap on 15W/8530K00
- Looking for a good 1000-20K horn.
- Building Eggleston rosa clones , any input ?
- Air Core vs Iron Core - When?
- High end sound - does any specfic approach give up the goods more than another?
- Psychoacoustic considerations for my OB project
- Need opinions for 10" pro woofer + horn build
- Advice for my first project
- Rebuilding a commercial speaker?
- How to test a speaker
- Magnetic field
- ZA5.5 reviews?
- Critical Midhorn Build
- Acoustic model 3212C speakers
- Need advice on large Dayton Audio HT system.
- on the usefullness of 3/4" tweeters
- A question about phase
- Tannoy Monitor Red Response?
- Looking for Seas woofer/HDS tweeter design
- A 15" bass unit to try OB in Australia
- Monitor Audio Silver S1 repair
- Why aren't coaxial speakers more popular?
- Cheapo version of Gravesen's Acapella with Pioneer B20
- DIY crossover inductors
- Speaker measurement with WM-61A
- Eric Forker's 77hz conical horn
- SB acoustics MidBass polarity .....
- OB for vintage Philips drivers
- newb general questions
- In praise of center channels
- Custom two-way for car?
- Harry Olson and open baffles
- Looking for midtweeter to go with a 10" woofer
- Driver for AH-160hz horn: cd vs cone?
- Original 18Sound waveguide design
- Audio Technology
- Do I part out my 107's on ebay or rebuild the woofers as the surrounds are shot...
- ZD5 Reloaded.
- Thrown together OBs...
- Cross-over problems Kappa 8 and 9
- If anybody is still interested in fiber, air, models in a duct ...
- Poor Plumber's Pluto, a novel DIY project
- New build - the Marvel
- Small 2way with high end qualities project - Tweeter needed
- Opinions on............
- "Small" enclosure for Tannoy 15"
- OB Line Array midwoofer.......
- Is this a poor result?
- Speakers for our office "Living Room"
- Bracing overkill yay or nay ?
- In-wall Speakers advice
- Dealing with an 8" driver offset
- Rock Wool Equivalent Volume
- Value/performance drivers for 2 way speakers
- Question.. 2 Drivers in series, is there a change in Vas? 2 times??
- Found: A Distributor of OEM Drivers
- AS studio monitors
- More T/S specs needed for SB Acoustics
- Need Help w/ Bass Cabinet for TAD TL-1102 & TL-1601a. Use w/ TD-4001 & Yamamoto Horn
- Tang Band W5-704D TL?
- New CanCan Speakers by Leo Frank
- Why do Klispch and JBL use titanium compression drivers?
- onken Onken w or A7 or Valencia
- Mutiple drivers in a TL, same BL?
- Is cone movement only proportional with Sd?
- Gedlee's SPEAK, and baffle/piston directivity control
- lampizator endorphin open baffle problem
- OMNI Gallery
- old cone refreshing
- My current OB experiment
- Sloped or staggered D'Appolito
- A question of resistance measurements on Philips MR SQ8 drivers
- 2-Way. First system ever
- How about the test results in this site?
- Not a "speaker guy" but have DIY crossover question(s).
- Zaph SR71 Build
- Simulating No Baffle speakers
- What speaker system for tube amplifier
- Sherwood Forester
- 2way bi-amped system with digital crossover
- B&W 801D discontinued?
- square tractrix midhorn vs circular?
- Scan-Speak 10F JMLC horn combo - large dip troubleshooting
- cascading bypass caps
- Progress on the Open Baffle, Line Array, Econo Wave -- pix
- Goodmans Magnum project
- Where to begin? A series of questions
- 2" Driver Help
- four inch driver with good efficiency and low Rms/high Qms?
- 10" coax - need opinions
- studio monitors
- Help: Beyma 12G40 vented options?
- Can you recommend me a midbass?
- Salvaged pair of tweater and woofer
- My 8-inch open baffle speaker
- 3 WAY design WMTM (opinion needed)
- sony slim sticks
- Line Array Help
- Infinity SM 225 speaker repair?
- Zaph SR-71 question
- another n00b question
- Smiths 1200 htz horn x over
- wharfedale super 12 rs dd parameters
- Tannoy 3149R Drivers - Parameters Needed
- Frequency Response/Roll-off
- Tuning a Speaker cabinet
- Are these late '80's Philips tweeters? Anyone know SPL/Z?
- kef iq 1 tweeter
- 3-way hi-end design thoughts
- Not DIY but too cool not to share with you.
- Reengineer What I Already Have?
- ProAc D28 info required
- cannot figure out crossover
- Coral 25L-25B/Altec 808-8B Speaker
- Building SMV5- Newbie questions
- Why keeping baffle size is important ?
- Janzen crossover component opinions
- Cab "porting" help for live sound mains...
- Does someone recognize these?
- Acoustic Research AR-2X restoration
- Seas Idunn kit
- Silly mistake
- La Scala cabinet.. for a sub?
- Waveguide loaded MT dipole?
- Portable speaker similar toAR Powered Partners
- three way with woofer as sub
- significance of phase
- Increase cone mass to rid cone resonance; worth it?
- Speaker Recommendation For Mini Aleph
- Electrovoice 15" plus horn for hifi?
- i have two ep2500 amps and need to get the most techno possible
- Tweeter distorting due to woofer roll off I think.
- Port noise
- >>> Project Floorstanding Cabinet Wanted <<<
- Corrective circuit phase shift?
- wouldn't the port material itself resonate?
- Need help Cabinet design/dimesion for SEAS 8"
- Speaker makes a scratching sound
- Q of audible resonances.
- Need help if anyone still own/remember Monitor Audio Studio 2
- HPM900 possible crossover problem
- Some help with box tuning
- managing KlarkTechnik DN8000
- Rs mtmww
- New Scan Speak midrange driver
- Don Keele's presentation at MWAF
- Heybrook HB3
- New Mid - Scan-Speak 15M/4624G
- Modifying a B2031P
- JBL Urei 6260 swap or not..
- khorn style b cabinet plans
- 2 way suitable woofer?
- Rules of Thumb for Enclosure Designs - Questions
- Cross-over for vifa XT-19 tweeter
- Where to buy Dynavox LW5008 in Germany
- Vintage Mono Speaker - 1958?
- Realistic DB capability for surrounds and mains in home theatre
- Anybody have experience of any Wavecor drivers?
- Powered monitors - active or passive
- Beyma tweeter for Audax PR170 in a 2-way?
- Which adhesive for speaker roll surrounds?
- fr125s and sdx7 2-way project
- ECM8000 - THD and IMD performance
- setting up levels on a three way active system
- Speaker DIY impedence ??
- Can you identify these old speakers