View Full Version : Multi-Way
- Acoustic treatment for bass resonance?
- A source of cheap/decent high value inductors in europe?
- Help convert crossover 2.5 in 2 way (MTM)
- PMC BB5 speakers help
- New center build, opinions please !!
- Looking for a Calabrated measuring mic in Canada
- 3 way 4 driver OB project
- PMC clones
- 2-way: Waveguide + Cardioid-like
- Bi-wiring Connectors: how-to
- Modeling Beyma TPL-150 Ribbon
- 3 way driver compatibility check: first time speaker builder
- TAD TM-1201 horn loading
- crossover experts please help
- Who had the 3-way dipole with the empty baffle?
- DEQ2496/DCX2496 instead of Crossover in 2-way
- JBL SVA Center Channel + Surrounds
- Horn lens experience - mixing lows and highs with a JBL 2390
- Large horn (Iwata 300) + high end CD (TAD TD-1401) questions.
- Something tells me I want a couple of these
- Books!
- diy center speaker
- Proac D38 woofer
- stacked dahlquist dq10
- Use yellow glue on paper backed veneer?
- Glasses - a floor standing speakers.
- Woofer waveguides?
- Baffle thickness - 3/4" or 1"
- Linkwitz Transform - Driver selection?
- Improving on a already successful design.
- Cabinet vibrations
- Best woofer, midrange, tweeter, on your diy project?
- Audio Technology 10 inch woofer question
- Crossover question
- Cheap drop in replacement for KEF T27 SP1032 Tweeter?
- Pioneer Lafayette HW-7 Horn Tweeter
- T/S for DE250?
- 2 way crossover help
- KEF Mini Transmission Line Box
- A quitck T-S measurement question about useing scope.
- 2-way Bookshelf modeling help
- Can anyone identify these tweeters?
- LPG 51AT
- Polarity question
- Breaking in new speakers -BROWN NOISE
- Is there a time delay between stereo speakers if...
- notch filters for vented boxes
- WTMW Array Opinion
- Two way OB speaker for desktop usage?
- Bookshelf 3-way
- DECOUPLE SPEAKER FROM DESK
- ATC SM75-150 Waveguide
- DSP + passive XO hybrid?
- Will these speakers work?
- Can anyone identify the Taiwanese manufacturer of this woofer?
- "Cooler Tunes" for biking or anywhere!!
- Phase Plug?
- Matching driver spl or efficiency ?
- New SEAS drivers in Ditton 332 Cabinets
- Question about reflex duct shape
- Zaph Audio
- New multiway project complete---interesting!
- AR3a Capacitor needs substitution? Help me
- Focal 7V313 as good as modern best mids
- Any suitable woofers for use without an inductor?
- Boston Acoustic A200 crossover
- Series woofers Bad idea or okay
- Minimum phase design "recipe"
- TAD 3-way
- 2,5 way MTM, horisontal or vertical. any reason to not do it?
- KEF Carlton III resurrection with Seas 22T/AF
- Newbie in need of advice
- Ferguson Hill FH007 tweeter replacement
- Perspex (acrylic) open baffle
- Drowning in acronyms.......
- Focal Specialists I need your help Audiom 7V313 MIDRANGE
- MTM or Single Mid configuration
- Endorphine Mod
- Celestion TF1015 10 inch upper bass/mid
- Tang Band W4-1720/Series X-over help needed !
- 2426/2405 passive crossover
- VOLT 15" woofer PORTED OR TL BOX??
- Vifa XT25 vs XT19, which one to use?
- Speaker Based on SEAS' L12 RE Recommended Enclosure
- lobing of drive units
- Bass Cab Question
- Trimmer to substitute router?
- HiVi Planar Isodynamic Tweeters
- Crossover question
- V2 missiles - loudspeakers with character
- Allen Organ HC-18's mystery speaker
- 1" compression driver to horn mounting
- Help with tweeter swap on Microberoject...
- Desktop Open Baffles
- Renkus Heinz SSD 3301 2" compression drivers?
- Midrange for a 3-way
- Eton 7-360 Hex and my potentially terrible idea.
- My first crack........
- Monacor compression drivers. 160hz-7000hz!!!?
- New 2-Way Build - The Classic 15
- Seas W26FX-001 port help
- Using variable resistors (Pots) in X-Overs
- Upgrading X-over in my Kef IQ9.
- Plans for a mid-bass tractrix horn?
- aurasound tweeter measurements - is this correct
- dual JBL 2226Js work a sealed 10cuft box?
- Mirage omni 260
- Cross over mod for B&W 802 nautilus
- Crossover Components Suggestions for SEAS Coax
- Need help with midwoofer choice for 2-way
- B&C 12PE32 or 12PLB76 for below 500-600Hz?
- Bi-wiring: quote from "Loudspeakers For Music Recording And Reproduction"
- Woofer choices Audio Technology vs Focal Audiom
- Beyma TPL-150 Just Might be Worth the Price!
- Altec 288 cover repair
- Checking if tweeters are working?
- BW150/M5 from B&W DM5
- Wave Simulation for Real-time Sound Propagation of Dynamic Sources in Complex Scenes
- looking for Focal 7K415 7N515 or Vifa P13WH-00-08,
- Reversing polarity on 1st order Butterworth
- David Ralph Chameleons
- JBL 4310 fiberglass behind mid-driver
- Active crossover on Mission 752
- MCM 6.5" with comp driver for 2-way?
- Damping of the speaker cabinet
- Subtle design change - will it hurt?
- Modular Speaker - Basis for my DIY experimenting future
- I always knew that men are better listeners ... ;-)
- DM6 Recap
- The Monster three way
- Help fix this FMI 80 Woofer
- deliberately incorrectly connecting crossovers .. effect?
- SB_acoustics_by_me
- Active crossover for ZaphAudio BAMTM?
- Source of this impedance abberation
- Crossover wire gauge.
- Advice on modifying bookshelf speakers
- SB34NRX75 + BMS 4550 + Eminence H290?
- More impedance measurements
- Huge 2-way with 18" woofer and 2" exit compression driver?
- Power in (V*A) is much, much less than output Watts RMS ? And
- NAKAMICHI reference slimline monitors woofer retrofit....
- Where to find a replacement part for a discontinued Jamo tweeter ?
- HT design for large open rooms.
- Crossover help
- Help with parallel notch filter
- Tweeters appear to be dead?
- Where to start upgrading passive xover.
- Crossover or not.......
- Question Amp+Speakers
- JBL 2418h
- Cizek Model 1
- Time to try a 3-way.
- 2 way mini bookshelf w/bose fullrange and HiVi tn28
- Help design a horn for RS28f using HornRes
- drivers for a 3 way system
- Digital active crossover using two different amps?
- Desperately seeking taut bottom (end)
- Glue for aluminum face of Peel & Seal
- WiKin's Open Baffle Speaker System
- 5 Way Crossover design *HELP!*
- NHT VT 2.4 (mid range)- damage/ replacement
- Ditton 66
- Medium Efficiency Speakers for Integrated Tube Amps
- Crossover Component Upgrade Pitfalls?
- bi-wired speakers
- 16 ohm 6.5" midrange speaker
- British monitors driver ID - Ciare??????
- The Pringles powered hi-fi loudspeaker system! :^)
- Which woofer is this?
- ribbon speaker for HT - beginner
- Tannoy Gold 12" - HF not working
- Facebook Loudspeaker group
- RB2 kit that never got built
- SEAS 35 mm tweeter
- Help with Wilmslow Audio Forte
- Advice Wilmslow Audio Forte crossovers
- Can you gentlemen help me design a Zobel circuit?
- Too much speaker?
- Speaker Workshop runs slower on faster cpu ?
- Soldering tweeters.. how to do safely?
- A 2-way tower with Vifa woofer and Fostex FE103E...
- Advice on low sensivity tweeters
- Kef 104/2 - Power Requirements
- Mid-Woofer & Tweeter combo
- Need Help with my first speaker project
- TAD or Yuichi Arai cad horn plans?
- dipole monopole or?
- Mordaunt Short MS45Ti Series II
- Vintage SANSUI CABINET SPEAKERS 4 Way 5 Speaker
- Beach GhettoBlaster
- Tannoy Coaxial driver
- Bass Reflex on Yamaha NS1000M
- Fin, a full range phase linear open baffle speaker, with measurements
- TL Reasonant Freq
- Need help modifying my Mission speakers with ESS components
- Beyma 15B100 is back
- Possible issue with crossover
- Advice On Realistic Nova-15 - Gonna Gut Them
- B&W n803 Bi-Amping
- Can you have sparkling treble but without sibilance
- Top for tap
- Tweeter to match JX92S
- Speaker HELP please for a know-nothing.
- The "Step Up" Project
- Classic Polk designs anyone?
- Strange partial driver failure? loss of bass in one speaker
- Mission M73 repair
- Anyone try these new tweeters yet from Transducer Lab ?
- Looking for Speaker Builder '99 article - Navigating Speaker Design
- Poor man's Harbeth 40.1 copy?
- Nestorovic woofer system
- Any personal opinions on SS D3004/6640 (Beryllium)?
- Tweeter wiring and phase
- DIY 6B4G amplifier with Zu Audio Soul Superfly, on video!
- B-Spoke B-Speak
- Altec Voice of the theater worth the hassle?
- Vifa DQ25 Phase Shield removal surgery ...!
- Dampening Material for My Loudspeaker?
- Intern Helmholtz Absorber / bassrefleksport
- Kloss's Octave
- Am I heading in the right direction here?
- Kid friendly project
- New to DIY; Trying to decide a first build.
- Infinity Classia C336 crossover schematic
- Unexpected resonance
- Smooth 2 way speaker
- Building John's Paper Mache Horns
- Does anyone know these drivers?
- Best Place to Put a Zobel Network
- Modifying my Mission 765i with big Heils. I could use some advice
- 3 way transmission line enclosure
- Help with speakers ( Pioneer S-V3000 )
- 4 ohm drivers in series w/ crossover
- Hi-Vi M6a with Vifa XT25TG30.
- A professional 10" Bass Driver with lowest fres: McCauley's 6222; who have heard ?
- Beyma TPL-150 and RAAL 140-15D
- TL speaker pictures
- Fun with Dipoles & Waveguides
- Viability of Infinity IRS Beta's today?
- what effect does a 4 driver have on an 8 ohm crossover?
- OB based on idea of CS2
- Possible to model this configuration in PCD 7 ?
- Why are OMNI speakers not more popular?
- Cabinets supplyer In Europe
- Curb find.....
- 8"+1" two-way DIY speakers
- Is the best midrange a fullrange?
- Tannoy DC1000 vs Tannoy 609
- ONKEN 360 + IWATA HORN, 950 PB + T 925 what's the best alignment of the drivers