diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Apex Jr (http://www.diyaudio.com/forums/apex-jr/)
-   -   IN STOCK... 15,000UF 63V Snap In (http://www.diyaudio.com/forums/apex-jr/206439-stock-15-000uf-63v-snap.html)

Apex Jr 10th February 2012 11:28 PM

IN STOCK... 15,000UF 63V Snap In
 
1 Attachment(s)
I Bit the bullet and had some Snap In caps made for me, couldn't find them surplus so they are marked AJ (APEX JR) as the manufacturer, these are new stock.

15,000 Uf 63V at 105 degrees and measure 35MM X 70MM
1 3/8 Dia X 2 3/4" Tall

Price is $6.59ea 10 for $62.50

albertNL 11th February 2012 12:35 PM

Quote:

Originally Posted by Apex Jr (Post 2901153)
I Bit the bullet and had some Snap In caps made for me, couldn't find them surplus so they are marked AJ (APEX JR) as the manufacturer, these are new stock.

15,000 Uf 63V at 105 degrees and measure 35MM X 70MM
1 3/8 Dia X 2 3/4" Tall

Price is $6.59ea

Hi Steve,

Do you have specs?

Apex Jr 11th February 2012 04:34 PM

Yes, and post more after I get back from vacation and listed on the website.

Capacitance tolerance at 20C, 120Hz 20%

Load life of 2000 hr at 105C

Having Safety Vents

Wide temperature range

Leakage current at 20C
(After 1 minute application of rated voltage
1<0.02CV or 5Ma, whichever is smaller
Where C: Normal capacitance in Uf, V: Rated voltage in V

Dissipation Factor (Tan8) At 20C ,120Hz .15
For capacitance of more than 1000 add .02 for every increase of 1000Uf

Load Life: The following spec's shall be satified when the capacitors are restored to the 20C after the rated voltage has been applied for 2,000 hr
at 105C
Capacitance change < 20% of the initial value
Tan8 <200% of the initial specified value
I The initial value

Shelf life:
The following Spec's shall be satisfied when the capacitors are restored
to 20C after exposing them at 105C for 1000 Hrs without voltage applied
Capacitance change < 20% of the initial value
Tan8 < 150% of the initial specified value
I < 200% of the initial specified value

Satisfies characteristic W of JIS C5141

pooge 11th February 2012 04:55 PM

Now if they would become available with screw terminals....

DreadPirate 27th February 2012 11:56 AM

Made by Xicon?

AndrewGM 27th February 2012 12:21 PM

I'm interested when you get back !!

Apex Jr 27th February 2012 02:47 PM

Quote:

Originally Posted by DreadPirate (Post 2924752)
Made by Xicon?



NOPE.... These are made by TopMay along with some of my axial
450V electolytics ....These are better than the Xicons

AndrewGM....

I will be back March 5th and will PM you before.
.

Apex Jr 5th March 2012 01:24 AM

Just returned back from Vacation


All times are GMT. The time now is 01:26 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2