Question to member Ouroboros

TB · 16th February 2007, 03:16 AM

Hello,
I have found one of your posts in this thread: New EASY DIY brushless motor

You have posted schematic of PSU for floppy disk based motor for turntable. Will this PSU work also with Hard drive motors? I have nice two motors taken from hard drives used in servers. Those are self-contaned units ( I have noticed in majority of HD, rings with coils are glued to the base of the drive's motor well ). Bottom part of the motor is threaded and mounted to HD base with a nut. There are three connection pins in the center of the base. I guess, the ground is connected to the metal base of the motor. Those units would make great TT motor. I can make nice metal plate to mount those motors to. They should have a good power too. What I need is just good PSU.
Thanks for the help !!!

16th February 2007, 03:16 AM	#1
TB diyAudio Member Join Date: Jun 2004 Location: Northern VA	Question to member Ouroboros Hello, I have found one of your posts in this thread: New EASY DIY brushless motor You have posted schematic of PSU for floppy disk based motor for turntable. Will this PSU work also with Hard drive motors? I have nice two motors taken from hard drives used in servers. Those are self-contaned units ( I have noticed in majority of HD, rings with coils are glued to the base of the drive's motor well ). Bottom part of the motor is threaded and mounted to HD base with a nut. There are three connection pins in the center of the base. I guess, the ground is connected to the metal base of the motor. Those units would make great TT motor. I can make nice metal plate to mount those motors to. They should have a good power too. What I need is just good PSU. Thanks for the help !!!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Member and Biema Q400 question	Dalork	Solid State	3	2nd February 2011 08:08 AM
New member introduction & question	ianl	Tubes / Valves	10	23rd October 2009 05:44 AM
New member with a question about horn loaded compression driver-type speakers...	munkittrick	Car Audio	15	27th May 2009 12:49 PM
New member with CD player question	canetoad	Digital Source	7	10th December 2007 08:28 PM
Question for Member from Singapore CM	Alvinttt	Digital Source	23	7th November 2003 09:44 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving