Servo motor gone for good?? - diyAudio
Go Back   Home > Forums > Source & Line > Analogue Source

Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 25th October 2006, 09:23 PM   #1
berthej is offline berthej  Italy
diyAudio Member
 
Join Date: Feb 2006
Location: The Alps
Default Servo motor gone for good??

Hi all,

the DC servo motor on my trusty old Bang&Olufsen Beogram TX2 turntable (maybe not high end but at least expensive ) had been making a constant, loud, ticking sound for some time (most annoying). Suddenly last weekend the ticking stopped but now the motor runs very fast (faster than the old 78’ers!! ). The motor is a FG servo code MMX-4HrRPB.

I am certainly no expert on this, but my interpretation is that the servo sensor somehow must have been damaged. Does that make sense? Anyone knows if it is possible to find a replacement motor.

Greatly appreciate any input

Thanks

berthej
  Reply With Quote
Old 25th October 2006, 10:38 PM   #2
Zen Mod is offline Zen Mod  Serbia
diyAudio Member
 
Zen Mod's Avatar
 
Join Date: Jan 2003
Location: ancient Batsch , behind Iron Curtain
if it turns,my bet will be that only ( !!!?) electronics is in question
__________________
my Papa is smarter than your Nelson !
clean thread; Cook Book;PSM LS Cook Book;Baby DiyA ;Mighty ZM's Bloggg;Papatreasure;Papa...© by Mighty ZM
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
PWM controller for DC servo motor? space-cake Analogue Source 3 18th October 2008 03:20 PM
Servo motor controller? keantoken Everything Else 0 9th December 2006 07:49 AM
2 position servo/stepper motor breguetphile Parts 7 12th September 2004 11:31 PM
servo motor for turntable drive Mikewong Analogue Source 2 18th March 2004 08:51 AM
servo motor for turntable drive Mikewong Analogue Source 3 4th February 2004 09:57 AM


New To Site? Need Help?

All times are GMT. The time now is 02:10 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2