Mounting plate for Systemdek?

MTB musicman · 24th October 2006, 10:31 PM

My first post.....

I've just bought a secondhand Systemdek for beer money fitted with a Linn Basik LVX arm. The arm has a little damage to the tube up by the headshell so I may want to change it for a different one in the future.

Is it possible to get plates for such as the Rega rb300 or are there other simpler alternatives. Or is it easy to make a plate to fit the rega to the Systemdek 11X (with teardrop plate).

sreten · 25th October 2006, 10:05 AM

Hi,

Making a plate is relatively easy. Most non-rega arms you could get hold of
second-hand, Linn, Logic, Helius etc will fit the Linn mounting hole / dimensions.

For a Rega you would need some large washers for arm hieght adjustment.

/sreten.

AndrewT · 25th October 2006, 10:11 AM

Hi,
rb250 works well.
It is stiffer around the bearing yoke than the rb300 and responds better to the tweaks available to upgrade the back end (weights extensions etc).

24th October 2006, 10:31 PM	#1
MTB musicman diyAudio Member Join Date: Oct 2006	Mounting plate for Systemdek? My first post..... I've just bought a secondhand Systemdek for beer money fitted with a Linn Basik LVX arm. The arm has a little damage to the tube up by the headshell so I may want to change it for a different one in the future. Is it possible to get plates for such as the Rega rb300 or are there other simpler alternatives. Or is it easy to make a plate to fit the rega to the Systemdek 11X (with teardrop plate).

25th October 2006, 10:11 AM	#3
AndrewT diyAudio Member Join Date: Jul 2004 Location: Scottish Borders	Hi, rb250 works well. It is stiffer around the bearing yoke than the rb300 and responds better to the tweaks available to upgrade the back end (weights extensions etc). __________________ regards Andrew T.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Motor for Systemdek llX	watchvet	Analogue Source	17	24th November 2008 08:13 PM
Systemdek llX	Jazzcat	Analogue Source	3	12th October 2008 04:11 AM
Systemdek powersupply help	Humanjava	Analogue Source	4	15th April 2006 06:56 AM
systemdek 2x circuit	dhole	Analogue Source	0	29th June 2005 11:07 AM
mounting plate for transformer	dine1967	Parts	5	22nd April 2005 02:46 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

25th October 2006, 10:05 AM	#2
sreten diyAudio Member Join Date: Nov 2003 Location: Brighton UK	Hi, Making a plate is relatively easy. Most non-rega arms you could get hold of second-hand, Linn, Logic, Helius etc will fit the Linn mounting hole / dimensions. For a Rega you would need some large washers for arm hieght adjustment. /sreten.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)