Linn LP12 Plinth measurement needed

Mikewong · 11th May 2006, 03:51 AM

I got a used LP12 platter and bearing system and I would like to DIY
the wooden plinth and could any one of you here provide me with the
actual measurements(plinth/top plate etc).

Aengus · 25th May 2006, 09:20 PM

Hi Mike

Do you still need these measurements? If so, let me know what you need and I'll try to get them this weekend; but I'm fairly busy at the moment, so if you can be specific about which measurements you want that would be good.

Mikewong · 23rd June 2006, 04:28 AM

Yes!
Please.

Aengus · 25th June 2006, 12:09 AM

Here you go. I hope these are the dimensions you were looking for; if not, let me know.

[edit] The attachment doesn't seem to be taking; I'll try again.

Aengus · 25th June 2006, 12:10 AM

OK, here's a 95K version...

The feet are not shown.

willie000 · 22nd October 2006, 09:09 AM

Do you have the complete design drawings for the plinth, as to build from scratch.

Thanks

Aengus · 22nd October 2006, 06:13 PM

Nope, I just took the dimensions from my LP-12 and made the sketch.

What else do you need to know?

Aengus

willie000 · 22nd October 2006, 11:40 PM

Hi,

I would need a coplete drawing, with the sub chassis supports ...all the internal dimensions really

Thanks

Mikewong · 24th October 2006, 08:45 AM

Aengus.
Thank you for the details measurements and this would be a great help for me to start constructing the Linn Lp12 plinth.

Aengus · 24th October 2006, 03:15 PM

willie000 said:

Quote:

I would need a coplete drawing, with the sub chassis supports ...all the internal dimensions really

Hi

This would unfortunately call for a bit more dismantling than I can undertake just now. Sorry I can't be more helpful.

Perhaps someone else has the information readily available?

11th May 2006, 03:51 AM	#1
Mikewong diyAudio Member Join Date: Apr 2003 Location: Milan	Linn LP12 Plinth measurement needed I got a used LP12 platter and bearing system and I would like to DIY the wooden plinth and could any one of you here provide me with the actual measurements(plinth/top plate etc).

25th May 2006, 09:20 PM	#2
Aengus diyAudio Member Join Date: Apr 2004 Location: Victoria, BC	Do you have them yet? Hi Mike Do you still need these measurements? If so, let me know what you need and I'll try to get them this weekend; but I'm fairly busy at the moment, so if you can be specific about which measurements you want that would be good.

22nd October 2006, 09:09 AM	#6
willie000 diyAudio Member Join Date: Oct 2006	PLinth Do you have the complete design drawings for the plinth, as to build from scratch. Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help! Questions re Linn LP12	CC99	Analogue Source	7	13th March 2008 11:02 PM
linn lp12 archives	wrinaldi	Analogue Source	0	27th April 2007 03:49 PM
Linn LP12 Trampolin Kit	wmeyer57	Analogue Source	4	13th February 2007 03:38 PM
Linn LP12 first mod?	Fragen	Analogue Source	64	3rd April 2004 02:43 AM
Linn lp12 Mods	sleepy	Analogue Source	6	20th October 2002 11:28 PM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

23rd June 2006, 04:28 AM	#3
Mikewong diyAudio Member Join Date: Apr 2003 Location: Milan	Yes! Please.

25th June 2006, 12:09 AM	#4
Aengus diyAudio Member Join Date: Apr 2004 Location: Victoria, BC	Here you go. I hope these are the dimensions you were looking for; if not, let me know. [edit] The attachment doesn't seem to be taking; I'll try again.

22nd October 2006, 06:13 PM	#7
Aengus diyAudio Member Join Date: Apr 2004 Location: Victoria, BC	Nope, I just took the dimensions from my LP-12 and made the sketch. What else do you need to know? Aengus

22nd October 2006, 11:40 PM	#8
willie000 diyAudio Member Join Date: Oct 2006	Hi, I would need a coplete drawing, with the sub chassis supports ...all the internal dimensions really Thanks

24th October 2006, 08:45 AM	#9
Mikewong diyAudio Member Join Date: Apr 2003 Location: Milan	Aengus. Thank you for the details measurements and this would be a great help for me to start constructing the Linn Lp12 plinth.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read