|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
27th September 2005, 09:41 AM
|
#1 |
|
diyAudio Member
Join Date: Mar 2005
Location: Aussie
|
Asking for help with an old Beogram 1200 turtable
I have some questions about this old deck. I have one that was given away but needs a service .
The platter bearing seems noisy when spinning. Sitting down there is no lateral play , but I can actually lift the platter up (with the bearing still attatched) about 5mm. Should this unit have this much play? The belt has a round cross section (as opposed to the other flat turntable belts) Where can one find a replacement. (length is about 345mm folded in half) Could anyone please direct us to any service manual for this unit? Cheers. |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| RCF MFA 1200 amp | xtant | Chip Amps | 1 | 21st April 2007 03:06 PM |
| Beogram cdx 2 | jbator | Digital Source | 7 | 14th February 2006 07:29 AM |
| Bang & Olufsen Beogram 1023 | Nordic | Analogue Source | 10 | 23rd December 2005 08:52 AM |
| Anyone ever use mcm's 55-1200? | ttvonau | Multi-Way | 0 | 9th May 2002 07:51 AM |
| New To Site? | Need Help? |
| Page generated in 0.05376 seconds (74.74% PHP - 25.26% MySQL) with 10 queries |
