|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
23rd May 2005, 07:26 AM
|
#1 |
|
diyAudio Member
Join Date: Oct 2004
|
Has any ever used a MAX4063?
I tried to build the max4063 typical application from their data sheets (http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3761)
I have a Panasonic WM56A103 electret mic capsule when i connected it to the AUX input, and used a 2k bias resistor to power it, i pretty much have to put my mouth right up to the mic to get anything out the the output(pin4). and its low at that, thats with the default 26db gain... basicly i need a mic preamp powered from 5-12volts and needs to be damm small, i like this solution, if i can get it working. oh i need differential out... thanks mitch |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
| New To Site? | Need Help? |
| Page generated in 0.06963 seconds (71.55% PHP - 28.45% MySQL) with 9 queries |
