Help about SHISHIDO Pre Phono

Maurizio · 9th May 2005, 11:42 AM

I found this complete Line Stage preamp + pre phono, from Nobu Shishido.

I would like to use the Pre Phono stage, cause actually i'm using a 6J5 SRPP Line stage.

Unfortunately, i've the line scheme only.

Anyone can help me about the PSU..?

May i use the phono stage only? I've to change something to do it?

Regards to all,

Maurizio.

analog_sa · 9th May 2005, 12:22 PM

Shishido or not it's hardly a revolutionary circuit. Still, it should work well enough.

I can see no issues connecting the phono output to a line amp of your choice. Obviously the gain of this phono is not very high so the line amp will have to make up for it.

Any low ripple PS providing 300V dc should be suitable. With minor resistor adjustments any supply exceedding 250v can be adapted.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY phono to replace roksan phono stage	seroxatmad	Analog Line Level	6	14th December 2008 05:46 PM
new phono stage or old preamp with phono?	flohmann	Analog Line Level	2	2nd October 2008 09:51 PM
Nobu Shishido's 805 SET interstage	TugaTweaker	Tubes / Valves	14	14th May 2007 07:51 PM
Phono transformer VS Active phono pre	ckwong99	Analogue Source	0	2nd November 2005 04:35 AM
Should I replace Scott 222C phono stage with Claret phono stage?	Bing Yang	Analogue Source	0	22nd August 2005 06:41 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

9th May 2005, 12:22 PM	#2
analog_sa diyAudio Member Join Date: Aug 2002 Location: Sofia	Shishido or not it's hardly a revolutionary circuit. Still, it should work well enough. I can see no issues connecting the phono output to a line amp of your choice. Obviously the gain of this phono is not very high so the line amp will have to make up for it. Any low ripple PS providing 300V dc should be suitable. With minor resistor adjustments any supply exceedding 250v can be adapted.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)