diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Analogue Source (http://www.diyaudio.com/forums/analogue-source/)
-   -   bearing assembly for DIY turntable (http://www.diyaudio.com/forums/analogue-source/56915-bearing-assembly-diy-turntable.html)

wiggywag 8th May 2005 09:28 PM

bearing assembly for DIY turntable
 
Hi!

I'm about to make my own turntable and wondered if I could use my old rega planar 3's bearing assembly for my own platter which will have a weight around 27 lbs. That's a lot more than the platter it's bearing as a standard. I will use the arm from it too so I really dont need the rega anymore!

If a platter with a weight of 27 lbs is too much, then how much can the rega planar assembly carry and still perform well?

Any ideas?

;-) stig


All times are GMT. The time now is 09:24 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2