phonostage design - diyAudio
Go Back   Home > Forums > Source & Line > Analogue Source
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 17th April 2005, 08:22 PM   #1
diyAudio Member
Join Date: Dec 2003
Location: earth
Default phonostage design

ok, I am doing an mc phonostage, i have the first stage worked out, its going to use an lt1028, with passive riaa.

(or if anyone has alternative ic's please inform)

I am wondering about the 2nd stage though, the design is going to have a dual op-amp, reason will be clear later, so anyone with suggestions, this one will be the final stage, so those are the requirements.

thanks in advance, John
  Reply With Quote
Old 20th April 2005, 09:48 AM   #2
AndrewT is offline AndrewT  Scotland
diyAudio Member
Join Date: Jul 2004
Location: Scottish Borders
the final 75uS time constant (100r & 750nF) could be a passive after the last output opamp. Ensures roll off to infinity and minimises noise from earlier stages and simplifies the passive RIAA calculations.
Have you tried separating each time constant and placing it between active stages?
The new RIAA seems to roll off bass too early. I suggest new RIAA switchable to a larger RC and switchable to old RIAA.
I prefer old Riaa without any Bass roll-off even with my vented bass units.
regards Andrew T.
Sent from my desktop computer using a keyboard
  Reply With Quote


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
PCB layout for phonostage robmil Solid State 13 14th January 2009 02:22 PM
phonostage with 150VDC B+ alexg Tubes / Valves 9 18th August 2007 01:13 AM
rjm 2 tube phonostage hacknet Analogue Source 6 10th April 2006 05:27 AM
Pearl phonostage Mark777 Pass Labs 0 6th July 2003 11:18 AM
diy MC-phonostage Onvinyl Analogue Source 25 30th November 2002 04:24 PM

New To Site? Need Help?

All times are GMT. The time now is 10:03 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2