|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
5th February 2005, 03:54 PM
|
#1 |
|
diyAudio Member
Join Date: Feb 2005
Location: Portland, Or
|
Sketch of my platter design
Hi...
I posted a descriptiion of my platter project yesterday, so refer to that for details. Here's a sketch. Note that the lower lead filled section is a full diameter recess cut into the lower piece of acrylic before cementing the two pieces together. 
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Sketch For Bending Transducer (Prototype already built) | LineArray | Planars & Exotics | 81 | 3rd May 2009 12:15 PM |
| Just a simple sketch.... | Andy G | Multi-Way | 9 | 26th July 2007 09:10 AM |
| Box design sketch (pics) | Ornlu | Subwoofers | 10 | 13th July 2005 02:22 AM |
| Looking for sketch of electomagnetic field of a transformer | volker | Tubes / Valves | 3 | 4th April 2002 08:03 PM |
| New To Site? | Need Help? |
| Page generated in 0.06827 seconds (64.26% PHP - 35.74% MySQL) with 10 queries |
