Et2 Parts

stewartwen · 19th December 2004, 07:51 PM

I AM IN THE PROCESS OF REBUILDING AN EMINENT TECHNOLOGY ET2 TONE ARM. I FOUND THAT THE SPINDLE TUBE IS NOT TRUE! THER IS ASMALL RIPPLE IN THE TUBE. CAN ANYONE HELP WITH SUGGESTIONS OR REPLACEMENT PARTS?

stewartwen · 20th December 2004, 11:51 PM

I HAVE FOUND A SOURCE FOR EMINENT TECHNOLOGY AIR BEARING SPARES. THEY ARE AVAILIABLE FROM EMINENT TECHNOLOGY VIA THE WEBSITE. SPINDLES COST LESS THAN £75.
ALTHOUGH ALTERNATIVE TUBES ARE READILY AVAILIABLE BUT WILL HAVE TO BE MACHINED SPECIALLY BY THE LOCAL SHOP!
STEWARTWEN

iain · 27th March 2006, 06:21 PM

Hi how did the rebuild go?

Did you change/learn anything.

I have an old ET2 and keep toying with bringing it out of retirement or selling it.

Cheers
Iain

stewartwen · 3rd April 2006, 01:07 PM

Hi there I couldnt get any spares from Mr Thigpen so the ET2 is still not rebuilt. If you are willing to sell your old ET2 I would like to purchase it. I am so upset at the lack of spares for these arms because they sound soooooooooo much better than single point pick up arms.
Ah well another project bites the dust!
Stewart

iain · 4th April 2006, 09:30 PM

I might be interested have sent you an email. May ebay, but await your reply.

Cheers

iain

stewartwen · 5th April 2006, 11:03 AM

Hi Iain, tried to email you last nite. It came back twice, hhmmmmm
Well down to the plot!I am interested in your old ET2. I have a proposal for you if you email me at:
stewartwen@yahoo.co.uk
I will outline my plan. I would apreciate some pix of the arm. Does it have the air pump and manual and alignment guage. Do you know how old the arm is? Any way please email me and we will talk.
Stewart

iain · 10th April 2006, 01:04 PM

Hi

stewartwen. You have pm. You will get an error message when you reply, but please ignore it

regards

Iain

19th December 2004, 07:51 PM	#1
stewartwen diyAudio Member Join Date: Jul 2004 Location: FYLDE	Et2 Parts I AM IN THE PROCESS OF REBUILDING AN EMINENT TECHNOLOGY ET2 TONE ARM. I FOUND THAT THE SPINDLE TUBE IS NOT TRUE! THER IS ASMALL RIPPLE IN THE TUBE. CAN ANYONE HELP WITH SUGGESTIONS OR REPLACEMENT PARTS?

20th December 2004, 11:51 PM	#2
stewartwen diyAudio Member Join Date: Jul 2004 Location: FYLDE	ET2 SPARES I HAVE FOUND A SOURCE FOR EMINENT TECHNOLOGY AIR BEARING SPARES. THEY ARE AVAILIABLE FROM EMINENT TECHNOLOGY VIA THE WEBSITE. SPINDLES COST LESS THAN £75. ALTHOUGH ALTERNATIVE TUBES ARE READILY AVAILIABLE BUT WILL HAVE TO BE MACHINED SPECIALLY BY THE LOCAL SHOP! STEWARTWEN

27th March 2006, 06:21 PM	#3
iain diyAudio Member Join Date: May 2004 Location: Nottingham	ET2 Hi how did the rebuild go? Did you change/learn anything. I have an old ET2 and keep toying with bringing it out of retirement or selling it. Cheers Iain

3rd April 2006, 01:07 PM	#4
stewartwen diyAudio Member Join Date: Jul 2004 Location: FYLDE	ET2 parts Hi there I couldnt get any spares from Mr Thigpen so the ET2 is still not rebuilt. If you are willing to sell your old ET2 I would like to purchase it. I am so upset at the lack of spares for these arms because they sound soooooooooo much better than single point pick up arms. Ah well another project bites the dust! Stewart

5th April 2006, 11:03 AM	#6
stewartwen diyAudio Member Join Date: Jul 2004 Location: FYLDE	ET2 Hi Iain, tried to email you last nite. It came back twice, hhmmmmm Well down to the plot!I am interested in your old ET2. I have a proposal for you if you email me at: stewartwen@yahoo.co.uk I will outline my plan. I would apreciate some pix of the arm. Does it have the air pump and manual and alignment guage. Do you know how old the arm is? Any way please email me and we will talk. Stewart


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

4th April 2006, 09:30 PM	#5
iain diyAudio Member Join Date: May 2004 Location: Nottingham	I might be interested have sent you an email. May ebay, but await your reply. Cheers iain

10th April 2006, 01:04 PM	#7
iain diyAudio Member Join Date: May 2004 Location: Nottingham	Hi stewartwen. You have pm. You will get an error message when you reply, but please ignore it regards Iain

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Want to trade: PC parts for speaker parts.	Spasticteapot	Swap Meet	8	15th January 2007 01:02 PM
PARTS PARTS PARTS!!! Infocus Powerview 820, triplet, ballast, light, power supply!!!	marioinla	Swap Meet	1	31st August 2004 04:22 PM
Trade your DAC parts for chip amp parts	jeff mai	Swap Meet	3	12th July 2004 03:51 PM
Comparison of SMD parts to standard parts	BrianGT	Parts	0	2nd July 2002 09:09 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read