|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
15th December 2004, 10:28 PM
|
#1 |
|
diyAudio Member
Join Date: Dec 2004
Location: West Yorkshire, UK
|
help required!
Hi all, great site by the way.
Now my problem. I am a complete newbie to turntables so my apology if this seems a bit simplistic! I have just got a pro-ject debut 2 and am having problems with the setting up of the anti skating weight. The manual states I need to bend the 'anti skating weight support hoop' as shown in the manual debut 2 manual but the diagram makes no sense (to me) and I don’t want to bend the 'anti skating weight support hoop' to far. Does anyone have a pic of how it should be done? A downforce tool??? was also supplied but no reference is made in the manual, how does this work? i.e. where do I put it?? Any help would be greatly appreciated Ross |
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| help required with p3a | Mark25 | Solid State | 5 | 15th November 2006 11:41 PM |
| Help required ! | LarryN | Parts | 2 | 19th July 2004 01:05 AM |
| Help required | martioz | Swap Meet | 3 | 2nd February 2003 03:42 AM |
| Help required please | Andy G | Multi-Way | 0 | 29th November 2002 10:50 PM |
| amp required | b.m.turner | Solid State | 4 | 13th November 2002 12:37 AM |
| New To Site? | Need Help? |
| Page generated in 0.33198 seconds (100.00% PHP - 0% MySQL) with 9 queries |
