Garrard 301 template - Page 2

jo-briggs · 24th January 2005, 08:49 PM

Plo,

You could send it as a .dxf or a .dwg file, both are generic AutoCad export files, and there are several freeware programs that will read them (try http://www.2haveit.com/ or http://www.download.com/ ). User could download CadSTD Lite from www.cadstd.com which will allow them to read, redraw, and print your file. www.rhino3d.com can be downloaded as a trial, it will read both these file types, and allow you to draw & redraw in 3D, so you can print photorealistic pictures of your final design (Rhino used to be a 30 times trial, so if you didn't close the program you coud use it for ages - it may now be a 30 day trial) I heartily recommend Rhino as an excellent value for money product, it's very intuitive, I've only looked at the manual about 3 times in 8 years.

jo-briggs · 24th January 2005, 09:04 PM

This is a drawing of a deck I did as an exercise

plo · 25th January 2005, 02:50 PM

Thanks jo_briqqa.

I have saved the template to a .dxf file and a. dwg file, but it is not the valid file extension that I could attach here for everybody to view. It has to be either in gif or jpg, or png, or txt, or pdf file!

jo-briggs · 25th January 2005, 09:04 PM

You could e-mail them to people who want them.

plo · 1st February 2005, 02:07 PM

No problem.

Anyone who need the template could contact me.

Soundadvice · 2nd February 2005, 06:49 AM

To answer your question , for anthing Garrard, (as well as some Quad stuff ) put AVONDALE AUDIO (U.K.) into your search engine !

Sorry cant post the U.R.L. as I am a new member and I have not checked all the rules of this site yet !

tuckers · 11th July 2005, 06:53 AM

I am looking for Garrard 301 templates.

PCN, do you have a finished version of yours? OR is the one you posted the latest?

I have access to many illustration programs and CAD programs, so if you send me a file I can probably make a PDF to post here for everybody.

Thanks!
Tuckers

phn · 11th July 2005, 08:37 PM

I have the dwg file made by plo. Since it's not mine I don't want to upload it. I can send it over, though.

And would someone here be kind to remove plo's email address? Maybe he's already swamped in spam.

tuckers · 12th July 2005, 07:15 AM

Hi PHN,

If you could email it to my address that would be great! You can reach me at

johnh

at

despammed.com

Thanks!

eboni · 31st October 2005, 12:55 PM

Just want to share to you a garrard plinth that i made for my friend. it is 6" thick, red oak wood, weighs 16kgs and can accomodate 2 tone arms.

2nd February 2005, 06:49 AM	#16
Soundadvice diyAudio Member Join Date: Feb 2005 Location: south wales	Garrard 301 template To answer your question , for anthing Garrard, (as well as some Quad stuff ) put AVONDALE AUDIO (U.K.) into your search engine ! Sorry cant post the U.R.L. as I am a new member and I have not checked all the rules of this site yet !

11th July 2005, 06:53 AM	#17
tuckers diyAudio Member Join Date: Jan 2005 Location: San Francisco	Looking for 301 Templates I am looking for Garrard 301 templates. PCN, do you have a finished version of yours? OR is the one you posted the latest? I have access to many illustration programs and CAD programs, so if you send me a file I can probably make a PDF to post here for everybody. Thanks! Tuckers

12th July 2005, 07:15 AM	#19
tuckers diyAudio Member Join Date: Jan 2005 Location: San Francisco	connecting Hi PHN, If you could email it to my address that would be great! You can reach me at johnh at despammed.com Thanks!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
dual turntable mounting template	PTSOUNDLAB	Analogue Source	5	27th February 2010 01:04 AM
LTSpice Simulation template?!	ipop07	Tubes / Valves	6	14th May 2009 03:21 AM
Garrard 301 and SME 3012 plinth template	ozval	Analogue Source	2	14th January 2009 05:56 PM
Ariel template, free to good home	chrish	Multi-Way	0	14th June 2008 01:21 AM
DIY Tonearm Mounting Template ???	PlatterMatter	Analogue Source	8	13th September 2007 06:01 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

24th January 2005, 08:49 PM	#11
jo-briggs diyAudio Member Join Date: Oct 2004	Plo, You could send it as a .dxf or a .dwg file, both are generic AutoCad export files, and there are several freeware programs that will read them (try http://www.2haveit.com/ or http://www.download.com/ ). User could download CadSTD Lite from www.cadstd.com which will allow them to read, redraw, and print your file. www.rhino3d.com can be downloaded as a trial, it will read both these file types, and allow you to draw & redraw in 3D, so you can print photorealistic pictures of your final design (Rhino used to be a 30 times trial, so if you didn't close the program you coud use it for ages - it may now be a 30 day trial) I heartily recommend Rhino as an excellent value for money product, it's very intuitive, I've only looked at the manual about 3 times in 8 years.

25th January 2005, 02:50 PM	#13
plo diyAudio Member Join Date: Jan 2005 Location: Hong Kong	Thanks jo_briqqa. I have saved the template to a .dxf file and a. dwg file, but it is not the valid file extension that I could attach here for everybody to view. It has to be either in gif or jpg, or png, or txt, or pdf file!

25th January 2005, 09:04 PM	#14
jo-briggs diyAudio Member Join Date: Oct 2004	You could e-mail them to people who want them.

1st February 2005, 02:07 PM	#15
plo diyAudio Member Join Date: Jan 2005 Location: Hong Kong	No problem. Anyone who need the template could contact me.

11th July 2005, 08:37 PM	#18
phn diyAudio Member Join Date: Oct 2004	I have the dwg file made by plo. Since it's not mine I don't want to upload it. I can send it over, though. And would someone here be kind to remove plo's email address? Maybe he's already swamped in spam.

31st October 2005, 12:55 PM	#20
eboni diyAudio Member Join Date: Aug 2004 Location: Valencia, CA	Just want to share to you a garrard plinth that i made for my friend. it is 6" thick, red oak wood, weighs 16kgs and can accomodate 2 tone arms.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)